Jetzt anpassen und kaufen
134,80 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 1302

Ausgabedatum: 2002 06 01

Geometrische Produktspezifikation (GPS) - Angabe der Oberflächenbeschaffenheit in der technischen Produktdokumentation (ISO 1302:2002)

Beschrieben sind Regeln für die Angabe der Oberflächenbeschaffenheit in der technischen Produktdokumentation (zB Zeichnungen, Spezifikationen, Verträge, Berichte) mittels...
Weiterlesen
ZURÜCKGEZOGEN : 2022 07 16
Beschrieben sind Regeln für die Angabe der Oberflächenbeschaffenheit in der technischen Produktdokumentation (zB Zeichnungen, Spezifikationen, Verträge, Berichte) mittels graphischer Symbole und Text. Ermöglicht wird die Angabe von Anforderungen an Oberflächen mittels Profilkenngrößen, bezogen auf die R-Kenngröße (Kenngröße aus dem Rauheitsprofil), die W-Kenngröße (Kenngröße aus dem Welligkeitsprofil) und die P-Kenngröße (Kenngröße berechnet aus dem Grundprofil) nach ISO 4287, die Motifkenngrößen (Rauheitsmotif und Welligkeitsmotif) nach ISO 12085 und die Kenngrößen bezogen auf die Materialanteilkurve nach ISO 13565-2 und ISO 13565-3. Für die Angabe von Anforderungen an Oberflächenunregelmäßigkeiten (Poren, Kratzer u. dgl.), die nicht durch Oberflächenbeschaffenheits-Kenngrößen angegeben werden können, wird auf ISO 8785 verwiesen, welche Oberflächenunregelmäßigkeiten behandelt.
ÖNORM EN ISO 21920-1
2022 07 15
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Profile - Teil 1: Angabe der Ob...
Norm
ÖNORM EN ISO 1302
2002 06 01
Geometrische Produktspezifikation (GPS) - Angabe der Oberflächenbeschaffenheit in der technischen Pr...
Norm
Norm
ISO 10135:2007
Ausgabedatum : 2007 11 15
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
Norm
ISO 1101:2004
Ausgabedatum : 2004 12 09
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Norm
ISO 129-1:2004
Ausgabedatum : 2004 09 24
Technical drawings — Indication of dimensions and tolerances — Part 1: General principles
Norm
ÖNORM EN ISO 11562
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS)- Oberflächenbeschaffenheit: Tastschnittverfahren - Meßtechnische Eigenschaften von phasenkorrekten Filtern (ISO 11562:1996)
Norm
ÖNORM EN ISO 12085
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Motifkenngrößen (ISO 12085:1996)
Norm
ÖNORM EN ISO 13565-1
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren; Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften - Teil ....(abgekürzt)
Norm
ÖNORM EN ISO 13565-2
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren; Oberflächen mit plateauartigen funktionsrelevanten Eigenschaften - Teil ....(abgekürzt)
Norm
ÖNORM EN ISO 13565-3
Ausgabedatum : 2000 09 01
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren; Oberflächen mit plateuartigen funktionsrelevanten Eigenschaften - Teil 3: Beschreibung der Höhe von Oberflächen mit der Wahrscheinlichkeitsdichtekurve (ISO 13565-3:1998)
Norm
ÖNORM EN ISO 14253-1
Ausgabedatum : 1999 02 01
Geometrische Produktspezifikationen (GPS) - Prüfung von Werkstücken und Meßgeräten durch Messen - Teil 1: Entscheidungsregeln für die Feststellungen von Übereinstimmung oder Nichtübereinstimmung mit Spezifikationen (ISO 14253-1:1998)
Norm
ÖNORM EN ISO 14660-1
Ausgabedatum : 1999 12 01
Geometrische Produktspezifikation (GPS) - Geometrieelemente - Teil 1: Grundbegriffe und Definitionen (ISO 14660-1:1999)
Norm
ÖNORM EN ISO 3098-2
Ausgabedatum : 2000 11 01
Technische Produktdokumentation - Schriften - Teil 2: Lateinische Schriftzeichen, Ziffern und Zeichen (ISO 3098-2:2000)
Norm
ÖNORM EN ISO 3274
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Nenneigenschaften von Tastschnittgeräten (ISO 3274:1996)
Norm
ÖNORM EN ISO 4287
Ausgabedatum : 1998 12 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der Oberflächenbeschaffenheit (ISO 4287:1997)
Norm
ÖNORM EN ISO 4288
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Regeln und Verfahren für die Beurteilung der Oberflächenbeschaffenheit (ISO 4288:1996)
Norm
ÖNORM EN ISO 8785
Ausgabedatum : 1999 11 01
Geometrische Produktspezifikation (GPS) - Oberflächenunvollkommenheiten - Begriffe, Definitionen und Kenngrößen (ISO 8785:1998)
Norm
ISO 129-1:2018
Ausgabedatum : 2018 02 23
Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
Norm
ISO 1101:2017
Ausgabedatum : 2017 02 01
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Norm
ISO 3098-2:2000
Ausgabedatum : 2000 04 20
Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
Norm
ISO 3274:1996
Ausgabedatum : 1996 12 05
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
Norm
ISO 4287:1997
Ausgabedatum : 1997 04 03
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
Norm
ISO 4288:1996
Ausgabedatum : 1996 08 08
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
Norm
ISO 8785:1998
Ausgabedatum : 1998 07 16
Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
Norm
ISO 10135:2007
Ausgabedatum : 2007 11 15
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
Norm
ISO 10209-1:1992
Ausgabedatum : 1992 06 11
Technical product documentation — Vocabulary — Part 1: Terms relating to technical drawings: general and types of drawings
Norm
ISO 11562:1996
Ausgabedatum : 1996 12 05
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters
Norm
ISO 12085:1996
Ausgabedatum : 1996 08 15
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Motif parameters
Norm
ISO 13565-1:1996
Ausgabedatum : 1996 12 05
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions
Norm
ISO 13565-2:1996
Ausgabedatum : 1996 12 05
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve
Norm
ISO 13565-3:1998
Ausgabedatum : 1998 12 03
Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 3: Height characterization using the material probability curve
Norm
ISO 14253-1:1998
Ausgabedatum : 1998 11 12
Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformance or non-conformance with specifications
Norm
ISO 14660-1:1999
Ausgabedatum : 1999 10 21
Geometrical Product Specifications (GPS) — Geometrical features — Part 1: General terms and definitions
Norm
ISO 81714-1:1999
Ausgabedatum : 1999 12 16
Design of graphical symbols for use in the technical documentation of products — Part 1: Basic rules
Norm
ÖNORM EN ISO 21920-1
Ausgabedatum : 2022 07 15
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Profile - Teil 1: Angabe der Oberflächenbeschaffenheit (ISO 21920-1:2021)
Norm
ISO 1302:2002
Ausgabedatum : 2002 02 14
Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation