Jetzt anpassen und kaufen
64,38 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 1163-2

Ausgabedatum: 1999 10 01

Kunststoffe - Weichmacherfreie Polyvinylchlorid (PVC-U)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 1163-2:1995)

Dieser Teil von ISO 1 163 legt die Bedingungen zur Herstellung von Probekörpern in einem spezifizierten Zustand und die zur Bestimmung der Eigenschaften von PVC-U-Formma...
Weiterlesen
ZURÜCKGEZOGEN : 2019 07 02
Herausgeber:
Austrian Standards International
Format:
Digital | 8 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Dieser Teil von ISO 1 163 legt die Bedingungen zur Herstellung von Probekörpern in einem spezifizierten Zustand und die zur Bestimmung der Eigenschaften von PVC-U-Formmassen anzuwendenden Prüfverfahren fest. Jede in diesem Teil gelistete Eigenschaft, auf die im Zusammenhang mit Teil 1 Bezug genommen wird, ist nach dem in diesem Teil aufgeführten Prüfverfahren zu bestimmen. Für diese Eigenschaften sind keine Werte angegeben. Die für die Kennzeichnung benötigten Eigenschaften sind in Teil 1 dieser Internationalen Norm festgelegt. Alle Eigenschaften sind nach den in diesem Teil von ISO 1163 aufgeführten, geeigneten Prüfverfahren zu bestimmen. Die ermittelten Daten sind entsprechend ISO 10350 darzustellen. Die nach diesem Teil von ISO 1163 bestimmten Werte müssen nicht notwendigeweise mit denen identisch sein, die bei Anwendung von Probekörpern anderer Abmessungen oder solchen, die mit einem anderen Verfahren hergestellt wurden, erhalten werden. Die Eigenschaftswerte eines Probekörpers hängen von der Formmasse, der Form des Probekörpers, dem Prüfverfahren und dem Stadium der Anisotropie ab. Letzteres hängt von der Spritzdüse und den Spritzbedingungen wie z.B. Temperatur, Druck und Einspritzgeschwindigkeit ab. Auch nachfolgende Behandlung wie Konditionieren oder Tempern ist zu bedenken. Die thermische Vorgeschichte und innere Spannungen können die thermischen, und mechanischen Eigenschaften sowie die Spannungsrißempfindlichkeit stark beeinflussen, wirken sich weniger auf elektrische Eigenschaften aus, die im Wesentlichen von der chemischen Zusammensetzung der Formmasse abhängen. Um reproduzierbare Ergebnisse zu erhalten sind folgende Bedingungen einzuhalten: - Benutze Probekörper mit der festgelegten Abmessung und Vorbehandlung; - Wende die in diesem Teil von ISO 1163 festgelegten Prüfverfahren an.
ÖNORM EN ISO 21306-2
2019 07 01
Kunststoffe - Weichmacherfreie Polyvinylchlorid (PVC-U)-Werkstoffe - Teil 2: Herstellung von Probekö...
Norm
ÖNORM EN ISO 1163-2
1999 10 01
Kunststoffe - Weichmacherfreie Polyvinylchlorid (PVC-U)-Formmassen - Teil 2: Herstellung von Probekö...
Norm
Norm
ISO 1163-1:1995
Ausgabedatum : 1995 12 27
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications
Norm
ISO 4589-2:1996
Ausgabedatum : 1996 07 18
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
ISO 4589-3:1996
Ausgabedatum : 1996 08 08
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
Norm
ÖNORM EN ISO 178
Ausgabedatum : 2005 05 01
Kunststoffe - Bestimmung der Biegeeigenschaften (ISO 178:2001 + Amd 1:2004) (konsolidierte Fassung)
Normentwurf
ÖNORM EN ISO 178
Ausgabedatum : 2008 09 01
Kunststoffe - Bestimmung der Biegeeigenschaften (ISO/DIS 178:2008)
Norm
ÖNORM EN ISO 2818
Ausgabedatum : 1997 03 01
Kunststoffe - Herstellung von Probekörpern durch mechanische Bearbeitung (ISO 2818:1994)
Norm
ÖNORM EN ISO 291
Ausgabedatum : 2008 07 01
Kunststoffe - Normalklimate für Konditionierung und Prüfung (ISO 291:2008)
Norm
ÖNORM EN ISO 306
Ausgabedatum : 2004 10 01
Kunststoffe - Thermoplaste - Bestimmung der Vicat-Erweichungstemperatur (VST) (ISO 306:2004)
Norm
ÖNORM EN ISO 3167
Ausgabedatum : 2003 12 01
Kunststoffe - Vielzweckprobekörper (ISO 3167:2002)
Norm
ÖNORM EN ISO 4589-3
Ausgabedatum : 1996 11 01
Kunststoffe - Bestimmung des Brandverhaltens durch den Sauerstoff-Index - Teil 3: Prüfung bei erhöhter Temperatur (ISO 4589-3:1996)
Norm
ÖNORM EN ISO 527-1
Ausgabedatum : 1996 05 01
Kunststoffe - Bestimmung der Zugeigenschaften - Teil 1: Allgemeine Grundsätze (ISO 527-1:1993 einschließlich Corr 1:1994)
Norm
ÖNORM EN ISO 527-2
Ausgabedatum : 1996 07 01
Kunststoffe - Bestimmung der Zugeigenschaften - Teil 2: Prüfbedingungen für Form- und Extrusionsmassen (ISO 527-2:1993 einschließlich Corr 1:1994)
Norm
ÖNORM EN ISO 527-4
Ausgabedatum : 1997 09 01
Kunststoffe - Bestimmung der Zugeigenschaften - Teil 4: Prüfbedingungen für isotrop und anisotrop faserverstärkte Kunststoffverbundwerkstoffe (ISO 527-4:1997)
Norm
ÖNORM EN ISO 62
Ausgabedatum : 2008 05 01
Kunststoffe - Bestimmung der Wasseraufnahme (ISO 62:2008)
Norm
ÖNORM EN ISO 75-1
Ausgabedatum : 2004 09 01
Kunststoffe - Bestimmung der Wärmeformbeständigkeitstemperatur - Teil 1: Allgemeine Prüfverfahren (ISO 75-1:2004)
Norm
ÖNORM EN ISO 75-2
Ausgabedatum : 2006 09 01
Kunststoffe - Bestimmung der Wärmeformbeständigkeitstemperatur - Teil 2: Kunststoffe, Hartgummi (ISO 75-2:2004) (konsolidierte Fassung)
Norm
ÖNORM EN ISO 8256
Ausgabedatum : 2005 06 01
Kunststoffe - Bestimmung der Schlagzugzähigkeit (ISO 8256:2004)
Norm
ÖNORM EN ISO 899-1
Ausgabedatum : 2003 10 01
Kunststoffe - Bestimmung des Kriechverhaltens - Teil 1: Zeitstand-Zugversuch (ISO 899-1:2003)
Norm
ISO 62:1999
Ausgabedatum : 1999 02 04
Plastics — Determination of water absorption
Norm
ISO 75-1:1993
Ausgabedatum : 1993 08 26
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
ISO 75-2:1993
Ausgabedatum : 1993 08 26
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 178:1993
Ausgabedatum : 1993 05 06
Plastics — Determination of flexural properties
Norm
ISO 179:1993
Ausgabedatum : 1993 05 06
Plastics — Determination of Charpy impact strength
Norm
ISO 291:1997
Ausgabedatum : 1997 07 24
Plastics — Standard atmospheres for conditioning and testing
Norm
ISO 293:1986
Ausgabedatum : 1986 10 09
Plastics — Compression moulding test specimens of thermoplastic materials
Norm
ISO 306:1994
Ausgabedatum : 1994 07 21
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
ISO 527-1:1993
Ausgabedatum : 1993 06 10
Plastics — Determination of tensile properties — Part 1: General principles
Norm
ISO 527-2:1993
Ausgabedatum : 1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 527-4:1997
Ausgabedatum : 1997 04 10
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Norm
ISO 899-1:1993
Ausgabedatum : 1993 12 23
Plastics — Determination of creep behaviour — Part 1: Tensile creep
Norm
ISO 1163-1:1995
Ausgabedatum : 1995 12 27
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications
Norm
ISO 1183:1987
Ausgabedatum : 1987 07 09
Plastics — Methods for determining the density and relative density of non-cellular plastics
Norm
ISO 1210:1992
Ausgabedatum : 1992 07 23
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
Norm
ISO 2818:1994
Ausgabedatum : 1994 08 18
Plastics — Preparation of test specimens by machining
Norm
ISO 3167:1993
Ausgabedatum : 1993 06 10
Plastics — Multipurpose test specimens
Norm
ISO 4589-2:2017
Ausgabedatum : 2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
ISO 4589-3:2017
Ausgabedatum : 2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
Norm
ISO 8256:1990
Ausgabedatum : 1990 12 20
Plastics — Determination of tensile-impact strength
Norm
ISO 10350:1993
Ausgabedatum : 1993 12 23
Plastics — Acquisition and presentation of comparable single-point data
Norm
ÖNORM EN ISO 21306-2
Ausgabedatum : 2019 07 01
Kunststoffe - Weichmacherfreie Polyvinylchlorid (PVC-U)-Werkstoffe - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 21306-2:2019)
Norm
ISO 1163-2:1995
Ausgabedatum : 1995 08 03
Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties