Jetzt anpassen und kaufen
185,23 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 128-2

Ausgabedatum: 2021 02 15

Technical product documentation (TPD) - General principles of representation - Part 2: Basic conventions for lines (ISO 128-2:2020)

This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or maps), their designations and their configurations, as well as general ru...
Weiterlesen
ZURÜCKGEZOGEN : 2023 05 16
This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or maps), their designations and their configurations, as well as general rules for the draughting of lines. In addition, this document specifies general rules for the representation of leader and reference lines and their components as well as for the arrangement of instructions on or at leader lines in technical documents. Annexes have been provided for specific information on mechanical, construction and shipbuilding technical drawings. For the purposes of this document the term “technical drawing” is interpreted in the broadest possible sense encompassing the total package of documentation specifying the product (workpiece, subassembly, assembly).
ÖNORM EN ISO 128-2
2023 05 15
Technische Produktdokumentation (TPD) - Allgemeine Grundlagen der Darstellung - Teil 2: Linien, Grun...
Norm
ÖNORM EN ISO 128-2
2021 02 15
Technical product documentation (TPD) - General principles of representation - Part 2: Basic convent...
Norm
ÖNORM ISO 128-24
2015 07 01
Technische Zeichnungen - Allgemeine Grundlagen der Darstellung - Teil 24: Linien in Zeichnungen der ...
Norm
ÖNORM ISO 128-25
2009 04 01
Technische Zeichnungen - Allgemeine Grundlagen der Darstellung - Teil 25: Linien in Schiffbauzeichnu...
Norm
ÖNORM ISO 128-22
2009 01 01
Technische Zeichnungen - Allgemeine Grundlagen der Darstellung - Teil 22: Grund- und Anwendungsregel...
Norm
ÖNORM ISO 128-24
2008 02 01
Technische Zeichnungen - Allgemeine Grundlagen der Darstellung - Teil 24: Linien in Zeichnungen der ...
Norm
ÖNORM EN ISO 128-20
2002 07 01
Technische Zeichnungen - Allgemeine Grundlagen der Darstellung - Teil 20: Linien, Grundregeln (ISO 1...
Norm
ÖNORM EN ISO 128-21
2002 04 01
Technische Zeichnungen - Allgemeine Grundlagen der Darstellung - Teil 21: Ausführung von Linien mit ...
Norm
ÖNORM A 6058
1988 10 01
Technische Zeichnungen; Linien
Norm
ÖNORM A 6058-1
1971 12 01
Technische Zeichnungen; Linien für maschinentechnische Zeichnungen
Norm
ÖNORM A 6060
1962 10 01
Technische Zeichnungen; Linien und Maßstäbe
Norm
ÖNORM A 6060
1959 11 09
Technische Zeichnungen; Linien und Maßstäbe
Norm
ÖNORM A 6060
1954 06 01
Technische Zeichnungen; Linien und Maßstäbe
Norm
ÖNORM M 1100
1947 06 04
Maschinentechnische Zeichnungen; Arten, Formate, Linien, Maßstäbe
Norm
ÖNORM M 1100
1934 06 15
Maschinentechnische Zeichnungen; Arten, Formate, Linien, Maßstäbe
Norm
ÖNORM M 1100
1923 11 15
Zeichnungen; Formate, Maßstäbe
Norm
Historie aufklappen
Norm
ISO 128-3:2020
Ausgabedatum : 2020 06 18
Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts
Norm
ISO 128-15:2013
Ausgabedatum : 2013 06 25
Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings
Norm
ISO 129-1:2018
Ausgabedatum : 2018 02 23
Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
Norm
ISO 129-5:2018
Ausgabedatum : 2018 04 03
Technical product documentation — Indication of dimensions and tolerances — Part 5: Dimensioning of structural metal work
Norm
ISO 1101:2017
Ausgabedatum : 2017 02 01
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Norm
ISO 2203:1973
Ausgabedatum : 1973 03 01
Technical drawings — Conventional representation of gears
Norm
ISO 2538-2:2014
Ausgabedatum : 2014 08 29
Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
Norm
ISO 2553:2019
Ausgabedatum : 2019 03 18
Welding and allied processes — Symbolic representation on drawings — Welded joints (Corrected version 2021-09)
Norm
ISO 3040:2016
Ausgabedatum : 2016 04 11
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
Norm
ISO 3766:2003
Ausgabedatum : 2003 12 12
Construction drawings — Simplified representation of concrete reinforcement
Norm
ISO 4463-1:1989
Ausgabedatum : 1989 11 02
Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria
Norm
ISO 4463-3:1995
Ausgabedatum : 1995 12 14
Measurement methods for building — Setting-out and measurement — Part 3: Check-lists for the procurement of surveys and measurement services
Norm
ISO 5261:1995
Ausgabedatum : 1995 10 26
Technical drawings — Simplified representation of bars and profile sections
Norm
ISO 5455:1979
Ausgabedatum : 1979 02 01
Technical drawings — Scales
Norm
ISO 5456-4:1996
Ausgabedatum : 1996 06 20
Technical drawings — Projection methods — Part 4: Central projection (Corrected version 1998-07)
Norm
ISO 5459:2011
Ausgabedatum : 2011 08 10
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
Norm
ISO 6410-1:1993
Ausgabedatum : 1993 05 06
Technical drawings — Screw threads and threaded parts — Part 1: General conventions
Norm
ISO 6428:1982
Ausgabedatum : 1982 12 01
Technical drawings — Requirements for microcopying
Norm
ISO 7437:1990
Ausgabedatum : 1990 09 13
Technical drawings — Construction drawings — General rules for execution of production drawings for prefabricated structural components
Norm
ISO 7519:1991
Ausgabedatum : 1991 11 21
Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings
Norm
ISO 8560:2019
Ausgabedatum : 2019 04 01
Technical drawings — Construction drawings — Representation of modular sizes, lines and grids
Norm
ISO 10110-1:2019
Ausgabedatum : 2019 10 10
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
Norm
ISO 10135:2007
Ausgabedatum : 2007 11 15
Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
Norm
ISO 10209:2012
Ausgabedatum : 2012 07 11
Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
Norm
ISO 11091:1994
Ausgabedatum : 1994 12 22
Construction drawings — Landscape drawing practice
Norm
ISO 12671:2021
Ausgabedatum : 2021 04 06
Thermal spraying — Thermally sprayed coatings — Symbolic representation on drawings
Norm
ISO 15785:2002
Ausgabedatum : 2002 06 27
Technical drawings — Symbolic presentation and indication of adhesive, fold and pressed joints
Norm
ISO 15787:2016
Ausgabedatum : 2016 08 26
Technical product documentation — Heat-treated ferrous parts — Presentation and indications
Norm
ISO 16792:2021
Ausgabedatum : 2021 04 07
Technical product documentation — Digital product definition data practices
Norm
ÖNORM EN ISO 128-2
Ausgabedatum : 2023 05 15
Technische Produktdokumentation (TPD) - Allgemeine Grundlagen der Darstellung - Teil 2: Linien, Grundregeln (ISO 128-2:2022)
Norm
ISO 128-2:2020
Ausgabedatum : 2020 07 08
Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines