Jetzt anpassen und kaufen
72,72 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 19063-2

Ausgabedatum: 2020 12 15

Kunststoffe - Schlagzähe Polystyrol(PS-I)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 19063-2:2020)

Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von PS-I-Formmassen für das Spritzgießen und die Extrusion an...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 14 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von PS-I-Formmassen für das Spritzgießen und die Extrusion anzuwendenden Prüfverfahren fest. Es legt die Anforderungen an die Handhabung des Prüfmaterials und an die Klimatisierung, sowohl des Prüfmaterials vor der Formgebung als auch der Probekörper vor der Prüfung, fest. Dieses Dokument enthält Verfahren und Bedingungen für die Herstellung von Probekörpern sowie Verfahren zum Messen der Eigenschaften der Werkstoffe, aus denen diese Probekörper hergestellt werden. Es listet Eigenschaften und Prüfverfahren auf, die zur Charakterisierung von PS-I-Formmassen geeignet und notwendig sind. Die Eigenschaften wurden aus den allgemeinen Prüfverfahren in ISO 10350-1 ausgewählt. Weitere Prüfverfahren, die bei diesen Formmassen häufig angewendet werden oder von besonderer Bedeutung dafür sind, sind in diesem Dokument ebenso enthalten wie die in ISO 19063-1 festgelegten kennzeichnenden Eigenschaften. Die hierin festgelegten Verfahren der Probekörperherstellung und -konditionierung sowie die Probekörpermaße und Prüfverfahren dienen dazu, reproduzierbare und vergleichbare Prüfergebnisse zu erhalten. Die gemessenen Werte werden nicht notwendigerweise mit denen identisch sein, die bei der Anwendung von Probekörpern anderer Abmessungen oder solchen, die mit anderen Verfahren hergestellt wurden, erhalten werden.
ÖNORM EN ISO 19063-2
2020 12 15
Kunststoffe - Schlagzähe Polystyrol(PS-I)-Formmassen - Teil 2: Herstellung von Probekörpern und Best...
Norm
ÖNORM EN ISO 2897-2
2004 05 01
Kunststoffe - Schlagzähe Polystyrol (PS-I)-Formmassen - Teil 2: Herstellung von Probekörpern und Bes...
Norm
ÖNORM EN ISO 2897-2
1999 09 01
Kunststoffe - Schlagzähe Polystyrol (PS-I)-Formmassen - Teil 2: Herstellung von Probekörpern und Bes...
Norm
Norm
ISO 62:2008
Ausgabedatum : 2008 02 01
Plastics — Determination of water absorption
Norm
ISO 75-1:2020
Ausgabedatum : 2020 02 28
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
ISO 75-2:2013
Ausgabedatum : 2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 179-1:2010
Ausgabedatum : 2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 179-2:2020
Ausgabedatum : 2020 05 14
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
ISO 291:2008
Ausgabedatum : 2008 04 22
Plastics — Standard atmospheres for conditioning and testing
Norm
ISO 293:2004
Ausgabedatum : 2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
ISO 294-1:2017
Ausgabedatum : 2017 05 10
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 306:2013
Ausgabedatum : 2013 11 08
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
ISO 527-1:2019
Ausgabedatum : 2019 07 26
Plastics — Determination of tensile properties — Part 1: General principles
Norm
ISO 527-2:2012
Ausgabedatum : 2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 527-4:1997
Ausgabedatum : 1997 04 10
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Norm
ISO 1133-1:2011
Ausgabedatum : 2011 11 28
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
Norm
ISO 1183-1:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
ISO 2561:2012
Ausgabedatum : 2012 11 09
Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
Norm
ISO 2818:2018
Ausgabedatum : 2018 12 13
Plastics — Preparation of test specimens by machining
Norm
ISO 4589-2:2017
Ausgabedatum : 2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
ISO 8256:2004
Ausgabedatum : 2004 07 02
Plastics — Determination of tensile-impact strength
Norm
ISO 10350-1:2017
Ausgabedatum : 2017 10 11
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
Norm
ISO 11357-2:2020
Ausgabedatum : 2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
ISO 20753:2018
Ausgabedatum : 2018 10 19
Plastics — Test specimens
Norm
IEC 60695-11-10
Ausgabedatum : 1999 03 31
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods
Norm
IEC 60695-11-20
Ausgabedatum : 1999 03 31
Fire hazard testing Test flames -- 500 W flame test methods