Jetzt anpassen und kaufen
72,72 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 19066-2

Ausgabedatum: 2020 06 15

Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Werkstoffe - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 19066-2:2020)

Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Werk...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 15 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Werkstoffen anzuwendenden Prüfverfahren fest. Es gibt die Anforderungen an die Behandlung des Probenmaterials und für das Konditionieren des Probenmaterials vor dem Formen und der Probekörper vor der Prüfung an. Dieses Dokument gibt Verfahren und Bedingungen für die Herstellung der Probekörper und Verfahren für die Bestimmung der Eigenschaften der Werkstoffe an, aus denen diese Probekörper hergestellt werden. Es führt Eigenschaften und Prüfverfahren auf, die geeignet und notwendig sind, um MABS-Werkstoffe zu charakterisieren. Die Eigenschaften wurden aus den in ISO 10350-1 festgelegten allgemeinen Prüfverfahren ausgewählt. Andere weithin gebräuchliche Prüfverfahren oder solche von besonderer Bedeutung für diese Werkstoffe sind ebenfalls in diesem Dokument enthalten, ebenso wie die kennzeichnenden Eigenschaften nach ISO 19066-1. Die in diesem Dokument festgelegten Verfahren der Probekörperherstellung und -konditionierung, die Probekörpermaße sowie die Prüfverfahren werden angewendet, um reproduzierbare und vergleichbare Prüfergebnisse zu erhalten. Die gemessenen Werte sind nicht immer mit denen identisch, die bei der Anwendung von Probekörpern anderer Abmessungen oder solchen, die mit anderen Verfahren hergestellt wurden, erhalten werden.
ÖNORM EN ISO 19066-2
2020 06 15
Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Werkstoffe - Teil 2: Herstellung ...
Norm
ÖNORM EN ISO 10366-2
2004 05 01
Kunststoffe - Methylmethacrylat-Acrylnitril-Butadien-Styrol (MABS)-Formmassen - Teil 2: Herstellung ...
Norm
ÖNORM EN ISO 10366-2
1999 10 01
Kunststoffe - Methylmethacrylat/Acrylnitril/Butadien/Styrol (MABS)-Formmassen - Teil 2: Herstellung ...
Norm
Norm
ISO 62:2008
Ausgabedatum : 2008 02 01
Plastics — Determination of water absorption
Norm
ISO 75-1:2020
Ausgabedatum : 2020 02 28
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
ISO 75-2:2013
Ausgabedatum : 2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 179-1:2010
Ausgabedatum : 2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 179-2:2020
Ausgabedatum : 2020 05 14
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
ISO 293:2004
Ausgabedatum : 2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
ISO 294-1:2017
Ausgabedatum : 2017 05 10
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 306:2013
Ausgabedatum : 2013 11 08
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
ISO 527-2:2012
Ausgabedatum : 2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 527-4:1997
Ausgabedatum : 1997 04 10
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Norm
ISO 1133-1:2011
Ausgabedatum : 2011 11 28
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
Norm
ISO 1183-1:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
ISO 1183-2:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
ISO 1183-3:1999
Ausgabedatum : 1999 09 30
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
Norm
ISO 1656:2019
Ausgabedatum : 2019 07 30
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
Norm
ISO 2561:2012
Ausgabedatum : 2012 11 09
Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
Norm
ISO 2818:2018
Ausgabedatum : 2018 12 13
Plastics — Preparation of test specimens by machining
Norm
ISO 4581:1994
Ausgabedatum : 1994 07 21
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
Norm
ISO 4589-2:2017
Ausgabedatum : 2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
ISO 4589-3:2017
Ausgabedatum : 2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
Norm
ISO 8256:2004
Ausgabedatum : 2004 07 02
Plastics — Determination of tensile-impact strength
Norm
ISO 10350-1:2017
Ausgabedatum : 2017 10 11
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
Norm
ISO 11357-1:2016
Ausgabedatum : 2016 09 16
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
Norm
ISO 11357-2:2020
Ausgabedatum : 2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
ISO 19066-1:2014
Ausgabedatum : 2014 09 24
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
Norm
ISO 20753:2018
Ausgabedatum : 2018 10 19
Plastics — Test specimens
Norm
IEC 60695-11-10
Ausgabedatum : 1999 03 31
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods
Norm
ISO 19066-2:2020
Ausgabedatum : 2020 03 17
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties