Jetzt anpassen und kaufen
64,38 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 23153-2

Ausgabedatum: 2020 05 01

Kunststoffe - Polyetheretherketone (PEEK)-Werkstoffe - Teil 2: Herstellung von Probekörpern und Bestimmung der Eigenschaften (ISO 23153-2:2020)

Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die Prüfverfahren, die zur Bestimmung der Eigenschaften von Polyetheretherketon- (PEEK)-Form- und ...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 11 Seiten
Sprache:
Deutsch | Englisch
Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die Prüfverfahren, die zur Bestimmung der Eigenschaften von Polyetheretherketon- (PEEK)-Form- und Extrusionswerkstoffen anzuwenden sind, fest. Die Anforderungen an die Behandlung des Prüfmaterials und an das Konditionieren des Prüfmaterials sowohl vor dem Formen als auch der Probekörper vor der Prüfung sind angegeben. Verfahren und Bedingungen für die Herstellung von Probekörpern sowie Verfahren für die Bestimmung der Eigenschaften der Werkstoffe, aus denen diese Probekörper hergestellt werden, sind ebenfalls angegeben. Eigenschaften und Prüfverfahren, die geeignet und notwendig sind, um PEEK-Form- und Extrusions-werkstoffe zu charakterisieren, sind aufgeführt. Um reproduzierbare und vergleichbare Prüfergebnisse zu erhalten, werden die hier festgelegten Verfahren für die Herstellung und Konditionierung, die Probekörpermaße und die Prüfverfahren angewendet. Die ermittelten Werte sind nicht unbedingt identisch mit denen, die an Probekörpern mit anderen Maßen oder an mit anderen Verfahren hergestellten Probekörpern erhalten wurden.
ÖNORM EN ISO 23153-2
2020 05 01
Kunststoffe - Polyetheretherketone (PEEK)-Werkstoffe - Teil 2: Herstellung von Probekörpern und Best...
Norm
Norm
ISO 62:2008
Ausgabedatum : 2008 02 01
Plastics — Determination of water absorption
Norm
ISO 75-1:2020
Ausgabedatum : 2020 02 28
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
ISO 75-2:2013
Ausgabedatum : 2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 179-1:2010
Ausgabedatum : 2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 294-1:2017
Ausgabedatum : 2017 05 10
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 527-1:2019
Ausgabedatum : 2019 07 26
Plastics — Determination of tensile properties — Part 1: General principles
Norm
ISO 527-2:2012
Ausgabedatum : 2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 1133-1:2011
Ausgabedatum : 2011 11 28
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
Norm
ISO 1183-1:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
ISO 1183-3:1999
Ausgabedatum : 1999 09 30
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
Norm
ISO 3915:1981
Ausgabedatum : 1981 11 01
Plastics — Measurement of resistivity of conductive plastics
Norm
ISO 10350-1:2017
Ausgabedatum : 2017 10 11
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
Norm
ISO 11357-2:2020
Ausgabedatum : 2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
ISO 11357-3:2018
Ausgabedatum : 2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 11359-2:1999
Ausgabedatum : 1999 10 07
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
Norm
ISO 11443:2021
Ausgabedatum : 2021 02 26
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
Norm
ISO 15512:2019
Ausgabedatum : 2019 04 30
Plastics — Determination of water content
Norm
ISO 20753:2018
Ausgabedatum : 2018 10 19
Plastics — Test specimens
Norm
ISO 23753-1:2019
Ausgabedatum : 2019 02 15
Soil quality — Determination of dehydrogenases activity in soils — Part 1: Method using triphenyltetrazolium chloride (TTC)
Norm
IEC 60695-11-10
Ausgabedatum : 1999 03 31
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods
Norm
ISO 23153-2:2020
Ausgabedatum : 2020 01 08
Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties