Jetzt anpassen und kaufen
109,76 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 1452-4

Ausgabedatum: 2020 03 01

Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungs- und Abwasserdruckleitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 4: Armaturen

Dieser Teil von ISO 1452 legt die Eigenschaften von Armaturen aus weichmacherfreiem Poly(vinylchlorid) (PVC-U) fest, die in Rohrleitungssystemen für die Wasserversorgung...
Weiterlesen
Gültig
Dieser Teil von ISO 1452 legt die Eigenschaften von Armaturen aus weichmacherfreiem Poly(vinylchlorid) (PVC-U) fest, die in Rohrleitungssystemen für die Wasserversorgung und für erdverlegte und nicht erdverlegte Abwasserdruckleitungen eingesetzt werden. Er legt auch die Prüfparameter für die Prüfverfahren fest, auf die in diesem Teil von ISO 1452 verwiesen wird. Zusammen mit ISO 1452-1, ISO 1452-2, ISO 1452-3 und ISO 1452-5 gilt dieser Teil von ISO 1452 für PVC-U-Armaturen mit Bauteilen aus PVC-U, weiteren Kunststoffen und Nicht-Kunststoffen, die für folgende Anwendungsgebiete vorgesehen sind: a) erdverlegte Versorgungs- und Hausanschlussleitungen; b) oberirdischer Transport von Wasser sowohl innerhalb als auch außerhalb von Gebäuden; c) erdverlegte und oberirdische Entwässerungs- und Abwasserdruckleitungen. Darüber hinaus ist dieser Teil von ISO 1452 anwendbar auf Rohrleitungssysteme, die für die Wasserversorgung unter Druck bis einschließlich 25 °C (Kaltwasser) für den menschlichen Gebrauch und für allgemeine Zwecke sowie für Abwasser unter Druck vorgesehen sind. Dieser Teil von ISO 1452 gilt auch für Armaturen zum Transport von Wasser und Abwasser bis einschließlich 45 °C. Für Temperaturen zwischen 25 °C und 45 °C gilt ISO 1452-2:2009, Bild A.1. Dieser Teil von ISO 1452 gilt für folgende Arten von Armaturen: - Armaturen für Klebverbindungen; - Armaturen für elastomere Dichtringverbindungen; - Armaturen für Flanschverbindungen.
ÖNORM EN ISO 1452-4
2020 03 01
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte En...
Norm
ÖNORM EN ISO 1452-4
2010 10 15
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte En...
Norm
ÖNORM EN 1456-1
2002 08 01
Kunststoff-Rohrleitungssysteme für erdverlegte und nicht erdverlegte Abwasserdruckleitungen - Weich...
Norm
ÖNORM EN 1452-4
2000 02 01
Kunststoff-Rohrleitungssysteme für die Wasserversorgung - Weichmacherfreies Polyvinylchlorid (PVC-U)...
Norm
Historie aufklappen
Norm
ISO 1452-3:2009
Ausgabedatum : 2009 12 01
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings (Corrected version 2010-02)
Norm
ISO 1452-5:2009
Ausgabedatum : 2009 12 01
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system (Corrected version 2009-12)
Norm
ISO 2507-1:1995
Ausgabedatum : 1995 02 02
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
Norm
ISO 2507-2:1995
Ausgabedatum : 1995 02 02
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
Norm
ISO 3126:2005
Ausgabedatum : 2005 03 16
Plastics piping systems — Plastics components — Determination of dimensions
Norm
ISO 7686:2005
Ausgabedatum : 2005 06 30
Plastics pipes and fittings — Determination of opacity
Norm
ISO 16135:2006
Ausgabedatum : 2006 03 14
Industrial valves — Ball valves of thermoplastics materials
Norm
ISO 16136:2006
Ausgabedatum : 2006 03 14
Industrial valves — Butterfly valves of thermoplastics materials
Norm
ISO 16137:2006
Ausgabedatum : 2006 03 14
Industrial valves — Check valves of thermoplastics materials
Norm
ISO 16138:2006
Ausgabedatum : 2006 03 14
Industrial valves — Diaphragm valves of thermoplastics materials
Norm
ISO 16139:2006
Ausgabedatum : 2006 03 14
Industrial valves — Gate valves of thermoplastics materials
Norm
ISO 21787:2006
Ausgabedatum : 2006 03 14
Industrial valves — Globe valves of thermoplastics materials
Norm
ISO 580:2005
Ausgabedatum : 2005 03 07
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
Norm
ISO 1167-1:2006
Ausgabedatum : 2006 01 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
Norm
ISO 1167-3:2007
Ausgabedatum : 2007 10 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
Norm
ISO 1183-1:2004
Ausgabedatum : 2004 01 19
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
Norm
ISO 1452-1:2009
Ausgabedatum : 2009 12 01
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
Norm
ISO 1452-2:2009
Ausgabedatum : 2009 12 01
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes