Jetzt anpassen und kaufen
109,76 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 20029-2

Ausgabedatum: 2019 04 01

Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester-Elastomer-Werkstoffe - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 20029-2:2017)

Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die anzuwendenden Norm-Prüfverfahren für die Bestimmung der Eigenschaften von thermoplastischen Po...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 28 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die anzuwendenden Norm-Prüfverfahren für die Bestimmung der Eigenschaften von thermoplastischen Polyester/Ester und Polyether/Ester-Elastomer-Werkstoffen fest. Es werden die Anforderungen an die Handhabung des Prüfwerkstoffs und/oder an die Konditionierung des Prüfwerkstoffs sowohl vor der Formgebung als auch der fertigen Probekörper vor der Prüfung angegeben. Angegeben werden Verfahren und Bedingungen für die Herstellung der Probekörper in einem bestimmten Zustand und Verfahren zum Messen der Eigenschaften der Werkstoffe, aus denen diese Probekörper hergestellt werden. Aufgeführt sind die Eigenschaften und Prüfverfahren, die geeignet und notwendig sind, um thermoplastische Polyester/Ester- und Polyether/Ester-Werkstoffe zu charakterisieren. Die Eigenschaften wurden aus den allgemeinen Prüfverfahren in ISO 10350-1 ausgewählt. Weitere Prüfverfahren, die bei diesen Werkstoffen häufig angewendet werden oder von besonderer Bedeutung sind, wie die in ISO 20029-1 festgelegten kennzeichnenden Eigenschaften (Härte, Schmelztemperatur und Zug-/Biegemodule), sind ebenfalls in diesem Dokument enthalten. Um reproduzierbare und vergleichbare Prüfergebnisse zu erzielen, ist es beabsichtigt, die in diesem Dokument angegebenen Herstellung- und Konditionierungsverfahren, Probekörpermaße und Prüfverfahren anzuwenden. Die ermittelten Messergebnisse müssen nicht notwendigerweise mit denen identisch sein, die mit Probekörpern anderer Maße oder Probekörper, die nach anderen Verfahren hergestellt wurden, erhalten wurden. Dieses Dokument wurde in Anlehnung an ISO 10350-1 erstellt, da es gegenwärtig keine Norm für die Ermittlung und Darstellung von vergleichbaren Einpunktkennwerten für thermoplastische Elastomere gibt. Nach Veröffentlichung dieses Dokuments und der analogen Norm für Polyurethane (ISO 16365-2) ist beabsichtigt, ISO 10350-3 für die Ermittlung und Darstellung von vergleichbaren Einpunktkennwerten für thermoplastische Elastomere auf Grundlage dieses Dokuments und ISO 16365-2 zu erstellen, der später Werkstoffnormen für thermoplastische Elastomere folgen werden.
ÖNORM EN ISO 20029-2
2019 04 01
Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester-Elastomer-Werkstoffe - Teil 2: H...
Norm
ÖNORM EN ISO 20029-2
2018 11 01
Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester-Elastomer-Werkstoffe - Teil 2: H...
Norm
ÖNORM EN ISO 14910-2
2013 08 01
Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester-Elastomer-Formmassen - Teil 2: H...
Norm
ÖNORM EN ISO 14910-2
2006 06 01
Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester- Elastomer-Formmassen - Teil 2: ...
Norm
Historie aufklappen
Norm
ISO 20029-2:2017
Ausgabedatum : 2017 12 05
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
Norm
ISO 37:2017
Ausgabedatum : 2017 11 10
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
Norm
ISO 62:2008
Ausgabedatum : 2008 02 01
Plastics — Determination of water absorption
Norm
ISO 75-2:2013
Ausgabedatum : 2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 179-1:2010
Ausgabedatum : 2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 179-2:2020
Ausgabedatum : 2020 05 14
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
ISO 294-1:2017
Ausgabedatum : 2017 05 10
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 306:2013
Ausgabedatum : 2013 11 08
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
ISO 527-2:2012
Ausgabedatum : 2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 815-1:2019
Ausgabedatum : 2019 11 26
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
Norm
ISO 868:2003
Ausgabedatum : 2003 04 14
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
Norm
ISO 974:2000
Ausgabedatum : 2000 02 03
Plastics — Determination of the brittleness temperature by impact
Norm
ISO 1133-2:2011
Ausgabedatum : 2011 11 29
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture
Norm
ISO 1183-1:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
ISO 1183-2:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
ISO 1183-3:1999
Ausgabedatum : 1999 09 30
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
Norm
ISO 4589-2:2017
Ausgabedatum : 2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
ISO 8256:2004
Ausgabedatum : 2004 07 02
Plastics — Determination of tensile-impact strength
Norm
ISO 11357-3:2018
Ausgabedatum : 2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 11357-4:2021
Ausgabedatum : 2021 02 10
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
Norm
ISO 11359-2:1999
Ausgabedatum : 1999 10 07
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
Norm
ISO 15512:2019
Ausgabedatum : 2019 04 30
Plastics — Determination of water content
Norm
ISO 20029-1:2017
Ausgabedatum : 2017 12 05
Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specification
Norm
ISO 20753:2018
Ausgabedatum : 2018 10 19
Plastics — Test specimens
Norm
ISO 22007-2:2015
Ausgabedatum : 2015 08 05
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
Norm
ISO 22007-3:2008
Ausgabedatum : 2008 12 08
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
Norm
ISO 22007-4:2017
Ausgabedatum : 2017 06 28
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
Norm
IEC 60695-11-10
Ausgabedatum : 1999 03 31
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods