Jetzt anpassen und kaufen
160,20 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 8434-1

Ausgabedatum: 2018 12 01

Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Teil 1: Verschraubungen mit 24°-Konus (ISO 8434-1:2018)

Dieses Dokument legt allgemeine und maßliche Anforderungen an 24°-Rohrverschraubungen mit Schneid-ring und O-Ring-Dichtkegel (kurz als DKO bezeichnet) fest, die für die V...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 60 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Dieses Dokument legt allgemeine und maßliche Anforderungen an 24°-Rohrverschraubungen mit Schneid-ring und O-Ring-Dichtkegel (kurz als DKO bezeichnet) fest, die für die Verwendung mit Stahlrohren und Rohren aus Nicht-Eisenmetallen mit einem Außendurchmesser von 4 mm bis einschließlich 42 mm geeignet sind. Diese Rohrverschraubungen sind für die Fluidtechnik und allgemeine Anwendungen im festgelegten Temperatur- und Druckbereich nach diesem Dokument vorgesehen. Sie sind für die Verbindung von Rohren mit geraden Enden und Schlaucharmaturen an Einschraublöchern nach ISO 6149-1, ISO 1179-1 und ISO 9974-1 vorgesehen. (Festlegungen für Schlaucharmaturen, siehe ISO 12151-2.) Diese Rohrverschraubungen sorgen in Hydraulikanlagen mit Arbeitsdrücken nach Tabelle 1 für Verbindungen mit vollem Durchfluss. Da der Druck, bei dem eine Anlage zufriedenstellend funktionsfähig ist, durch viele Faktoren beeinflusst wird, sind diese Werte nicht als abgesicherte Mindestwerte zu betrachten. Für jeden Anwendungsfall müssen ausreichende Prüfungen durchgeführt werden, die sowohl vom Anwender als auch vom Hersteller zu bewerten sind, um sicherzustellen, dass die geforderten Leistungsstufen eingehalten werden. Dieses Dokument legt ferner eine Prüfung der Funktionsfähigkeit und Eignung dieser Rohrverschraubungen fest.
ÖNORM EN ISO 8434-1
2018 12 01
Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Teil 1: Verschraubungen ...
Norm
ÖNORM EN ISO 8434-1
2009 03 01
Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Teil 1: Verschraubungen ...
Norm
ÖNORM EN ISO 8434-1
1997 12 01
Metallische Rohrverschraubungen für Fluidtechnik und allgemeine Anwendung - Teil 1: 24°-Schneidringv...
Norm
Norm
ISO 48:2010
Ausgabedatum : 2010 09 03
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 724:1993
Ausgabedatum : 1993 10 07
ISO general-purpose metric screw threads — Basic dimensions
Norm
ISO 965-1:2013
Ausgabedatum : 2013 09 13
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
Norm
ISO 1127:1992
Ausgabedatum : 1992 12 17
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
Norm
ISO 1179-1:2013
Ausgabedatum : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 1179-2:2013
Ausgabedatum : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
Norm
ISO 1179-4:2007
Ausgabedatum : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
Norm
ISO 3304:1985
Ausgabedatum : 1985 11 14
Plain end seamless precision steel tubes — Technical conditions for delivery
Norm
ISO 3305:1985
Ausgabedatum : 1985 11 07
Plain end welded precision steel tubes — Technical conditions for delivery
Norm
ISO 3601-3:2005
Ausgabedatum : 2005 11 10
Fluid power systems — O-rings — Part 3: Quality acceptance criteria (Corrected version 2006-04)
Norm
ISO 4759-1:2000
Ausgabedatum : 2000 11 09
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
Norm
ISO 5598:2008
Ausgabedatum : 2008 09 19
Fluid power systems and components — Vocabulary
Norm
ISO 6149-1:2019
Ausgabedatum : 2019 04 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
Norm
ISO 6149-2:2006
Ausgabedatum : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
Norm
ISO 6149-3:2006
Ausgabedatum : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
Norm
ISO 9227:2017
Ausgabedatum : 2017 03 17
Corrosion tests in artificial atmospheres — Salt spray tests
Norm
ISO 9974-1:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 9974-2:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
Norm
ISO 9974-3:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
Norm
ISO 19879:2021
Ausgabedatum : 2021 03 15
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
Norm
ISO 8434-1:2018
Ausgabedatum : 2018 07 27
Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors (Corrected version 2018-10)