Jetzt anpassen und kaufen
120,67 €
exkl. USt.
Konfigurieren
Norm
ÖNORM EN ISO 18797-1
Ausgabedatum: 2017 12 15
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016)
This document specifies the minimum requirements for materials selection, surface preparation, application, inspection, testing, qualification and acceptance criteria of ...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 40 Seiten
Sprache:
Englisch
Standards mitgestalten:
ICS
This document specifies the minimum requirements for materials selection, surface preparation, application, inspection, testing, qualification and acceptance criteria of external coating for steel risers pipes used in the splash zone, their field joints and clamps/guides, using an elastomeric protective coating based on polychloroprene, EPDM or equivalent. This is applicable for new construction and repair of applied pipes before installation. Maintenance requirements and field repairs are covered in ISO 18797-2.
This document also specifies the requirements for transportation, handling and storage of riser pipes before and after surface preparation and coating application.
ÖNORM EN ISO 18797-1
2017 12 15
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coa...
Norm
↖
Norm
ISO 37:2017
Ausgabedatum :
2017 11 10
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
Norm
ISO 48:2010
Ausgabedatum :
2010 09 03
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 813:2019
Ausgabedatum :
2019 07 17
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
Norm
ISO 814:2017
Ausgabedatum :
2017 07 31
Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
Norm
ISO 815-1:2019
Ausgabedatum :
2019 11 26
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
Norm
ISO 815-2:2019
Ausgabedatum :
2019 11 26
Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
Norm
ISO 1431-1:2012
Ausgabedatum :
2012 08 17
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
Norm
ISO 1817:2015
Ausgabedatum :
2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 2781:2018
Ausgabedatum :
2018 06 25
Rubber, vulcanized or thermoplastic — Determination of density
Norm
ISO 2812-2:2018
Ausgabedatum :
2018 11 06
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
Norm
ISO 4649:2017
Ausgabedatum :
2017 09 14
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
Norm
ISO 7619-1:2010
Ausgabedatum :
2010 09 23
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
Norm
ISO 8502-2:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
Norm
ISO 8502-3:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Norm
ISO 8502-4:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
Norm
ISO 8502-5:1998
Ausgabedatum :
1998 02 05
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
Norm
ISO 8502-6:2020
Ausgabedatum :
2020 04 30
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
Norm
ISO 8502-9:2020
Ausgabedatum :
2020 08 07
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
Norm
ISO 8503-2:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
Norm
ISO 8503-4:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
Norm
ISO 8503-5:2017
Ausgabedatum :
2017 03 02
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
Norm
ISO 21457:2010
Ausgabedatum :
2010 09 03
Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
Norm
ISO 21809-3:2016
Ausgabedatum :
2016 02 15
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
Norm
ISO 29601:2011
Ausgabedatum :
2011 04 07
Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film