Jetzt anpassen und kaufen
229,44 €
exkl. USt.
Konfigurieren
Norm
ÖNORM EN ISO 21809-3
Ausgabedatum: 2016 09 01
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
This part of ISO 21809 specifies requirements for field joint coating of seamless or welded steel pipes for buried and submerged sections of pipeline transportation syste...
Weiterlesen
ZURÜCKGEZOGEN
: 2020 11 02
Herausgeber:
Austrian Standards International
Format:
Digital | 137 Seiten
Sprache:
Englisch
Aktuell Gültig:
Standards mitgestalten:
ICS
This part of ISO 21809 specifies requirements for field joint coating of seamless or welded steel pipes for buried and submerged sections of pipeline transportation systems used in the petroleum,
petrochemical and natural gas industries as defined in ISO 13623. This part of ISO 21809 specifies the qualification, application and testing of the corrosion protection coatings applied to steel surfaces left
bare after the joining of pipes and fittings (components) by welding.
This part of ISO 21809 defines and codifies in Table 1 the different types of field joint coatings for pipelines.
This part of ISO 21809 does not address requirements for additional mechanical protection, for thermal insulation or for joint infills of concrete weight-coated pipes.
ÖNORM EN ISO 21809-3
2020 11 01
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in p...
Norm
ÖNORM EN ISO 21809-3
2016 09 01
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in p...
Norm
↖
Norm
ISO 34-1:2015
Ausgabedatum :
2015 06 02
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
Norm
ISO 37:2017
Ausgabedatum :
2017 11 10
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
Norm
ISO 188:2011
Ausgabedatum :
2011 09 26
Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
Norm
ISO 527-2:2012
Ausgabedatum :
2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 527-3:2018
Ausgabedatum :
2018 11 05
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
Norm
ISO 868:2003
Ausgabedatum :
2003 04 14
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
Norm
ISO 1431-1:2012
Ausgabedatum :
2012 08 17
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
Norm
ISO 1817:2015
Ausgabedatum :
2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 2178:2016
Ausgabedatum :
2016 03 17
Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
Norm
ISO 2781:2018
Ausgabedatum :
2018 06 25
Rubber, vulcanized or thermoplastic — Determination of density
Norm
ISO 2811-1:2016
Ausgabedatum :
2016 02 17
Paints and varnishes — Determination of density — Part 1: Pycnometer method
Norm
ISO 3303-1:2020
Ausgabedatum :
2020 09 16
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
Norm
ISO 3417:2008
Ausgabedatum :
2008 11 17
Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter
Norm
ISO 3801:1977
Ausgabedatum :
1977 09 01
Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
Norm
ISO 4591:1992
Ausgabedatum :
1992 12 03
Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
Norm
ISO 4593:1993
Ausgabedatum :
1993 11 18
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
Norm
ISO 4625-1:2020
Ausgabedatum :
2020 07 07
Binders for paints and varnishes — Determination of softening point — Part 1: Ring-and-ball method
Norm
ISO 7619-1:2010
Ausgabedatum :
2010 09 23
Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)
Norm
ISO 8501-3:2006
Ausgabedatum :
2006 03 03
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
Norm
ISO 8502-3:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Norm
ISO 8502-6:2020
Ausgabedatum :
2020 04 30
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
Norm
ISO 8502-9:2020
Ausgabedatum :
2020 08 07
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
Norm
ISO 8503-1:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
Norm
ISO 8503-2:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
Norm
ISO 8503-4:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
Norm
ISO 8503-5:2017
Ausgabedatum :
2017 03 02
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
Norm
ISO 8503-3:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure
Norm
ISO 11357-1:2016
Ausgabedatum :
2016 09 16
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
Norm
ISO 11357-2:2020
Ausgabedatum :
2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
ISO 11357-3:2018
Ausgabedatum :
2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 11357-6:2018
Ausgabedatum :
2018 03 09
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
Norm
ISO 13623:2017
Ausgabedatum :
2017 09 29
Petroleum and natural gas industries — Pipeline transportation systems
Norm
ISO 21809-2:2014
Ausgabedatum :
2014 10 29
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
Norm
ÖNORM EN ISO 21809-3
Ausgabedatum :
2020 11 01
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016 + Amd 1:2020) (consolidated version)
Norm
ISO 21809-3:2016
Ausgabedatum :
2016 02 15
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings