Jetzt anpassen und kaufen
120,67 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 10931

Ausgabedatum: 2015 12 15

Kunststoff-Rohrleitungssysteme für industrielle Anwendungen - Polyvinyliden Fluoride (PVDF) - Anforderungen an Rohrleitungsteile und das Rohrleitungssystem (ISO 10931:2005 + Amd 1:2015) (konsolidierte Fassung)

Diese Internationale Norm legt die Eigenschaften und Anforderungen an Rohrleitungsteile wie Rohre, Formstücke und Armaturen aus Polyvinylidenfluorid (PVDF) fest, die für ...
Weiterlesen
Gültig
Diese Internationale Norm legt die Eigenschaften und Anforderungen an Rohrleitungsteile wie Rohre, Formstücke und Armaturen aus Polyvinylidenfluorid (PVDF) fest, die für die Anwendung in oberirdisch verlegten Industrierohrleitungen aus thermoplastischen Kunststoffen vorgesehen sind. Sie gilt für Rohre, Formstücke, Armaturen und Zubehörteile aus PVDF, deren Verbindungen untereinander sowie mit Rohrleitungsteilen aus anderen Kunststoffen und Werkstoffen, die abhängig von ihrer Eignung für den Transport von flüssigen und gasförmigen Fluiden sowie von festen Bestandteilen in Fluiden für industrielle Anwendungen vorgesehen sind, einschließlich - chemische Industrieanlagen; - Industrieabwassertechnik; - Energietechnik (Kühl- und Brauchwasser); - Galvanisierungs- und Beizanlagen; - Halbleiterindustrie; - Futtermittelindustrie und - Kläranlagen.nDiese Internationale Norm gilt für Rohrleitungssysteme aus PVDF für Anwendungen bei bis zu 150 °C. FürAnwendungen bei über 120 °C, die vom kristallinen Schmelzpunkt des PVDF-Werkstoffes abhängig sind, sollte jedoch der Rat des Herstellers der Rohrleitungsteile eingeholt werden. (Die Rohrleitungsteile müssengegen den zu erwartenden mechanischen, thermischen und chemischen Beanspruchungen widerstehen undgegenüber den transportierten Fluiden beständig sein.) Eigenschaften und Anforderungen, die für PVDF allgemein gelten, sind in den entsprechenden Abschnittendieser Internationalen Norm aufgeführt. Werkstoffspezifische Eigenschaften und Anforderungen sind imAnhang A festgelegt.
ÖNORM EN ISO 10931
2015 12 15
Kunststoff-Rohrleitungssysteme für industrielle Anwendungen - Polyvinyliden Fluoride (PVDF) - Anford...
Norm
ÖNORM EN ISO 10931
2006 09 01
Kunststoff-Rohrleitungssysteme für industrielle Anwendungen - Polyvinyliden Fluoride (PVDF) - Anford...
Norm
Norm
ISO 7-1:1994
Ausgabedatum : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 228-1:2000
Ausgabedatum : 2000 09 21
Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 265-1:1988
Ausgabedatum : 1988 12 29
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
Norm
ISO 472:2013
Ausgabedatum : 2013 01 30
Plastics — Vocabulary
Norm
ISO 1043-1:2011
Ausgabedatum : 2011 11 09
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
Norm
ISO 1183-2:2004
Ausgabedatum : 2004 07 14
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
ISO 3126:2005
Ausgabedatum : 2005 03 16
Plastics piping systems — Plastics components — Determination of dimensions
Norm
ISO 4065:1996
Ausgabedatum : 1996 12 26
Thermoplastics pipes — Universal wall thickness table
Technische Regel
ISO/TR 10358:1993
Ausgabedatum : 1993 05 13
Plastics pipes and fittings — Combined chemical-resistance classification table
Norm
ISO 11357-3:2011
Ausgabedatum : 2011 04 28
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 16135:2006
Ausgabedatum : 2006 03 14
Industrial valves — Ball valves of thermoplastics materials
Norm
ISO 16136:2006
Ausgabedatum : 2006 03 14
Industrial valves — Butterfly valves of thermoplastics materials
Norm
ISO 16137:2006
Ausgabedatum : 2006 03 14
Industrial valves — Check valves of thermoplastics materials
Norm
ISO 16138:2006
Ausgabedatum : 2006 03 14
Industrial valves — Diaphragm valves of thermoplastics materials
Norm
ISO 16139:2006
Ausgabedatum : 2006 03 14
Industrial valves — Gate valves of thermoplastics materials
Norm
ISO 21787:2006
Ausgabedatum : 2006 03 14
Industrial valves — Globe valves of thermoplastics materials
Norm
ISO 7-1:1994
Ausgabedatum : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 265-1:1988
Ausgabedatum : 1988 12 29
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
Norm
ISO 1167:1996
Ausgabedatum : 1996 10 31
Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method
Norm
ISO 1183-2:2019
Ausgabedatum : 2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
ISO 2505-1:1994
Ausgabedatum : 1994 12 01
Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods
Norm
ISO 2505-2:1994
Ausgabedatum : 1994 12 01
Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters
Norm
ISO 3126:2005
Ausgabedatum : 2005 03 16
Plastics piping systems — Plastics components — Determination of dimensions
Norm
ISO 4065:2018
Ausgabedatum : 2018 01 15
Thermoplastics pipes — Universal wall thickness table (Corrected version 2019-12)
Norm
ISO 9080:2003
Ausgabedatum : 2003 03 13
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Technische Regel
ISO/TR 10358:2021
Ausgabedatum : 2021 06 25
Plastics pipes and fittings for industrial applications — Collection of data on combined chemical-resistance
Norm
ISO 11357-3:2018
Ausgabedatum : 2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 11922-1:1997
Ausgabedatum : 1997 04 03
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
Norm
ISO 12092:2000
Ausgabedatum : 2000 04 06
Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method
Norm
ISO 15853:1999
Ausgabedatum : 1999 11 25
Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
Norm
ISO 12162:1995
Ausgabedatum : 1995 06 01
Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient
Norm
ISO 16135:2006
Ausgabedatum : 2006 03 14
Industrial valves — Ball valves of thermoplastics materials
Norm
ISO 16136:2006
Ausgabedatum : 2006 03 14
Industrial valves — Butterfly valves of thermoplastics materials
Norm
ISO 16137:2006
Ausgabedatum : 2006 03 14
Industrial valves — Check valves of thermoplastics materials
Norm
ISO 16138:2006
Ausgabedatum : 2006 03 14
Industrial valves — Diaphragm valves of thermoplastics materials
Norm
ISO 16139:2006
Ausgabedatum : 2006 03 14
Industrial valves — Gate valves of thermoplastics materials
Norm
ISO 21787:2006
Ausgabedatum : 2006 03 14
Industrial valves — Globe valves of thermoplastics materials
Norm
ISO 10931:2005
Ausgabedatum : 2005 12 07
Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system