Jetzt anpassen und kaufen
160,20 €
exkl. USt.
Konfigurieren
Norm
ÖNORM EN ISO 21809-2
Ausgabedatum: 2014 12 15
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
This part of ISO 21809 specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded ep...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 60 Seiten
Sprache:
Englisch
Standards mitgestalten:
ICS
This part of ISO 21809 specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.
ÖNORM EN ISO 21809-2
2014 12 15
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in p...
Norm
↖
ÖNORM EN ISO 21809-2
2009 04 15
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in p...
Norm
ÖNORM EN ISO 21809-2
2008 04 01
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in p...
Norm
Norm
ISO 8130-2:1992
Ausgabedatum :
1992 12 03
Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method)
Norm
ISO 8130-3:1992
Ausgabedatum :
1992 12 03
Coating powders — Part 3: Determination of density by liquid displacement pyknometer
Norm
ISO 8502-3:1992
Ausgabedatum :
1992 10 01
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (Corrected version 1993-05)
Entwurf
ISO/DIS 8502-3
Ausgabedatum :
2014 04 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Norm
ISO 8502-6:2006
Ausgabedatum :
2006 06 21
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of soluble contaminants for analysis — The Bresle method
Norm
ISO 8502-9:1998
Ausgabedatum :
1998 04 23
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts (Corrected version 1999-12)
Entwurf
ISO/DIS 8502-9
Ausgabedatum :
2015 02 19
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
Norm
ISO 8503-4:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
Norm
ISO 8503-5:2003
Ausgabedatum :
2003 07 15
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
Entwurf
ISO/DIS 8503-5
Ausgabedatum :
2014 09 18
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
Norm
ISO 11127-6:2011
Ausgabedatum :
2011 12 06
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement
Norm
ISO 11357-1:2009
Ausgabedatum :
2009 10 13
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
Norm
ISO 13623:2009
Ausgabedatum :
2009 06 11
Petroleum and natural gas industries — Pipeline transportation systems
Norm
ÖNORM EN 10204
Ausgabedatum :
2005 01 01
Metallische Erzeugnisse - Arten von Prüfbescheinigungen
Norm
ISO 8130-2:2021
Ausgabedatum :
2021 06 23
Coating powders — Part 2: Determination of density by gas comparison pycnometer (referee method)
Norm
ISO 8130-3:2021
Ausgabedatum :
2021 06 23
Coating powders — Part 3: Determination of density by liquid displacement pycnometer
Norm
ISO 8502-3:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Norm
ISO 8502-6:2020
Ausgabedatum :
2020 04 30
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
Norm
ISO 8502-9:2020
Ausgabedatum :
2020 08 07
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
Norm
ISO 8503-4:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
Norm
ISO 8503-5:2017
Ausgabedatum :
2017 03 02
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
Norm
ISO 11127-6:2011
Ausgabedatum :
2011 12 06
Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement
Norm
ISO 11357-1:2016
Ausgabedatum :
2016 09 16
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
Norm
ISO 13623:2017
Ausgabedatum :
2017 09 29
Petroleum and natural gas industries — Pipeline transportation systems
Norm
ISO 21809-2:2014
Ausgabedatum :
2014 10 29
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings