Jetzt anpassen und kaufen
120,67 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 23553-1

Ausgabedatum: 2014 09 01

Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle Anforderungen - Teil 1: Automatische und halbautomatische Ventile (ISO 23553-1:2014)

Dieser Teil der ISO 23553 legt die Anforderungen an Sicherheit, Konstruktion und Leistung sowie die Prüfung von automatischen und halbautomatischen Ventilen für Öl fest. ...
Weiterlesen
ZURÜCKGEZOGEN : 2022 08 16
Herausgeber:
Austrian Standards International
Format:
Digital | 42 Seiten
Sprache:
Deutsch | Englisch
Standards mitgestalten:
Dieser Teil der ISO 23553 legt die Anforderungen an Sicherheit, Konstruktion und Leistung sowie die Prüfung von automatischen und halbautomatischen Ventilen für Öl fest. Er gilt für automatische und halbautomatische Ventile, die: - als Schnellschlusseinrichtungen ausgelegt sind; - in Verbrennungsanlagen eingesetzt werden, um den Öldurchfluss mit oder ohne Verzögerung des Schließvorgangs sowie mit oder ohne Verzögerung des Öffnungsvorgangs zu unterbrechen; - für den Einsatz mit Ölsorten ohne Benzin (z. B. Diesel, Rohöl, Schweröl oder Kerosin) vorgesehen sind;
ÖNORM EN ISO 23553-1
2023 04 01
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle An...
Norm
ÖNORM EN ISO 23553-1
2022 08 15
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle An...
Norm
ÖNORM EN ISO 23553-1
2014 09 01
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle An...
Norm
ÖNORM EN ISO 23553-1
2009 08 01
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle An...
Norm
ÖNORM EN 264
1991 08 01
Sicherheitsabsperreinrichtungen für Feuerungsanlagen mit flüssigen Brennstoffen - Sicherheitstechnis...
Norm
Historie aufklappen
Norm
ISO 228-1:2000
Ausgabedatum : 2000 09 21
Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 272:1982
Ausgabedatum : 1982 01 01
Fasteners — Hexagon products — Widths across flats
Norm
ISO 1179-1:2013
Ausgabedatum : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 1179-2:2013
Ausgabedatum : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
Norm
ISO 1179-3:2007
Ausgabedatum : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
Norm
ISO 1179-4:2007
Ausgabedatum : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
Norm
ISO 3601-5:2015
Ausgabedatum : 2015 03 26
Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications (Corrected version 2016-05)
Norm
ISO 6149-1:2006
Ausgabedatum : 2006 02 23
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
Norm
ISO 6149-3:2006
Ausgabedatum : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
Technische Regel
ISO/TR 7620:2005
Ausgabedatum : 2005 06 02
Rubber materials — Chemical resistance
Norm
ISO 8216-99:2002
Ausgabedatum : 2002 06 27
Petroleum products — Fuels (class F) — Classification — Part 99: General
Norm
ISO 8434-1:2007
Ausgabedatum : 2007 08 23
Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors
Norm
ISO 8434-2:2007
Ausgabedatum : 2007 08 28
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
Norm
ISO 8434-3:2005
Ausgabedatum : 2005 06 29
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
Norm
ISO 8434-6:2009
Ausgabedatum : 2009 08 07
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring (Corrected version 2010-05)
Norm
ISO 9974-1:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 9974-3:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
Norm
ISO 23936-1:2009
Ausgabedatum : 2009 04 15
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
Norm
ISO 23936-2:2011
Ausgabedatum : 2011 12 09
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
Norm
ASTM D 396
Ausgabedatum : 2012
Standard Specification for Fuel Oils
Norm
ASTM D 396
Ausgabedatum : 2015 01 01
Standard Specification for Fuel Oils
Norm
ÖNORM EN 10242
Ausgabedatum : 1995 02 01
Gewindefittings aus Temperguß
Norm
ÖNORM EN 1092-2
Ausgabedatum : 1997 09 01
Flansche und ihre Verbindungen - Runde Flansche für Rohre, Armaturen, Formstücke und Zubehörteile, nach PN bezeichnet - Teil 2: Gußeisenflansche
Norm
ÖNORM EN 1254-2
Ausgabedatum : 1998 04 01
Kupfer und Kupferlegierungen - Fittings - Teil 2: Klemmverbindungen für Kupferrohre
Norm
ÖNORM EN 1254-3
Ausgabedatum : 1998 04 01
Kupfer und Kupferlegierungen - Fittings - Teil 3: Klemmverbindungen für Kunststoffrohre
Norm
ÖNORM EN 1254-5
Ausgabedatum : 1998 04 01
Kupfer und Kupferlegierungen - Fittings - Teil 5: Fittings mit geringer Einstecktiefe zum Verbinden mit Kupferrohren durch Kapillar-Hartlöten
Norm
ÖNORM EN 1254-1
Ausgabedatum : 1998 04 01
Kupfer und Kupferlegierungen - Fittings - Teil 1: Kapillarlötfittings für Kupferrohre (Weich- und Hartlöten)
Norm
ÖNORM EN 12627
Ausgabedatum : 1999 09 01
Industriearmaturen - Anschweißenden für Armaturen aus Stahl
Norm
ÖNORM EN 12760
Ausgabedatum : 1999 12 01
Armaturen - Schweißmuffenenden für Armaturen aus Stahl
Norm
ÖNORM EN 10284
Ausgabedatum : 2000 07 01
Tempergußfittings mit Klemmanschlüssen für Polyethylen(PE)-Rohrleitungssysteme
Norm
ÖNORM EN 10241
Ausgabedatum : 2000 08 01
Stahlfittings mit Gewinde
Norm
ÖNORM EN 1092-4
Ausgabedatum : 2002 10 01
Flansche und ihre Verbindungen - Runde Flansche für Rohre, Armaturen, Formstücke und Zubehörteile, nach PN bezeichnet - Teil 4: Flansche aus Aluminiumlegierungen
Norm
ÖNORM EN 10305-3
Ausgabedatum : 2010 04 01
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre
Norm
ÖNORM EN 10305-2
Ausgabedatum : 2010 04 01
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 2: Geschweißte kaltgezogene Rohre
Norm
ÖNORM EN 10305-1
Ausgabedatum : 2010 04 01
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 1: Nahtlose kaltgezogene Rohre
Norm
ÖNORM EN 10305-4
Ausgabedatum : 2011 04 01
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-Druckleitungen
Norm
ÖNORM EN 1092-3
Ausgabedatum : 2004 01 01
Flansche und ihre Verbindungen - Runde Flansche für Rohre, Armaturen, Formstücke und Zubehörteile, nach PN bezeichnet - Teil 3: Flansche aus Kupferlegierungen
Norm
ÖNORM EN 10226-1
Ausgabedatum : 2004 09 01
Rohrgewinde für im Gewinde dichtende Verbindungen - Teil 1: Kegelige Außengewinde und zylindrische Innengewinde - Maße, Toleranzen und Bezeichnung
Norm
ÖNORM EN 10305-6
Ausgabedatum : 2005 08 01
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 6: Geschweißte kaltgezogene Rohre für Hydraulik- und Pneumatik-Druckleitungen
Norm
ÖNORM EN 10226-2
Ausgabedatum : 2005 10 01
Rohrgewinde für im Gewinde dichtende Verbindungen - Teil 2: Kegelige Außengewinde und kegelige Innengewinde - Maße, Toleranzen und Bezeichnung
Norm
ÖNORM EN 1057
Ausgabedatum : 2010 04 01
Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für Wasser- und Gasleitungen für Sanitärinstallationen und Heizungsanlagen
Norm
ISO 272:1982
Ausgabedatum : 1982 01 01
Fasteners — Hexagon products — Widths across flats
Norm
ISO 1179-1:2013
Ausgabedatum : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 1179-2:2013
Ausgabedatum : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
Norm
ISO 1179-3:2007
Ausgabedatum : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
Norm
ISO 1179-4:2007
Ausgabedatum : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
Norm
ISO 3601-5:2015
Ausgabedatum : 2015 03 26
Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications (Corrected version 2016-05)
Norm
ISO 6149-1:2019
Ausgabedatum : 2019 04 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
Norm
ISO 6149-3:2006
Ausgabedatum : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
Technische Regel
ISO/TR 7620:2005
Ausgabedatum : 2005 06 02
Rubber materials — Chemical resistance
Norm
ISO 8216-99:2002
Ausgabedatum : 2002 06 27
Petroleum products — Fuels (class F) — Classification — Part 99: General
Norm
ISO 8434-1:2018
Ausgabedatum : 2018 07 27
Metallic tube connections for fluid power and general use — Part 1: 24° cone connectors (Corrected version 2018-10)
Norm
ISO 8434-2:2007
Ausgabedatum : 2007 08 28
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
Norm
ISO 8434-3:2005
Ausgabedatum : 2005 06 29
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
Norm
ISO 8434-6:2009
Ausgabedatum : 2009 08 07
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring (Corrected version 2010-05)
Norm
ISO 9974-1:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 9974-3:1996
Ausgabedatum : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
Norm
ISO 23550:2011
Ausgabedatum : 2011 03 10
Safety and control devices for gas burners and gas-burning appliances — General requirements
Norm
ISO 23936-1:2009
Ausgabedatum : 2009 04 15
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
Norm
ISO 23936-2:2011
Ausgabedatum : 2011 12 09
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
Norm
ASTM D 396
Ausgabedatum : 2021 04 01
Standard Specification for Fuel Oils
Norm
ÖNORM EN ISO 23553-1
Ausgabedatum : 2022 08 15
Sicherheits-, Regel- und Steuereinrichtungen für Ölbrenner und Öl verbrennende Geräte - Spezielle Anforderungen - Teil 1: Automatische und halbautomatische Ventile (ISO 23553-1:2022)
Norm
ISO 23553-1:2014
Ausgabedatum : 2014 05 13
Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves