Jetzt anpassen und kaufen
185,23 €
exkl. USt.
Konfigurieren
Norm

ÖVE/ÖNORM EN 61400-4

Ausgabedatum: 2013 11 01

Windenergieanlagen - Teil 4: Auslegungsanforderungen für Getriebe von Windenergieanlagen (IEC 61400-4:2012) (deutsche Fassung)

Dieser Teil der Normenreihe 61400 gilt für geschlossene, die Drehzahl erhöhende Getriebe für Antriebsstränge von Horizontalachs-Windenergieanlagen mit einer Leistungsausl...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 166 Seiten
Sprache:
Deutsch
Dieser Teil der Normenreihe 61400 gilt für geschlossene, die Drehzahl erhöhende Getriebe für Antriebsstränge von Horizontalachs-Windenergieanlagen mit einer Leistungsauslegung von mehr als 500 kW. Er ist für Onshore- und Offshore-Windenergieanlagen anwendbar. Diese Internationale Norm liefert einen Leitfaden für die Analyse der Belastungen von Windenergieanlagen im Zusammenhang mit der Auslegung der Elemente von Getriebe und Getriebekasten. Zu den in dieser Norm behandelten Getriebeelementen gehören geradverzahnte, schrägverzahnte oder doppelschrägverzahnte Stirnräder und deren Kombinationen in einer parallelen Anordnung oder einer Planetenanordnung im Hauptantriebspfad. Diese Norm gilt nicht für Hilfsgetriebe (PTO). Die Norm beruht auf Getriebekonstruktionen mit Wälzlagern. Die Verwendung von Gleitlagern ist nach dieser Norm zulässig, deren Anwendung und Auslegung werden jedoch nicht behandelt. Außerdem ist ein Leitfaden für technische Aspekte von Wellen, Welle-Nabe-Verbindungen, Lagern und Konstruktion der Getriebegehäuse bis hin zur Entwicklung einer voll integrierten Konstruktion, die den Bedingungen der strengen Betriebsumgebung standhält, enthalten. Die Schmierung der Getriebe wird im Zusammenhang mit der Prototypen- und Serienprüfung behandelt. Schließlich wird ein Leitfaden für Betrieb und Wartung des Getriebes zur Verfügung gestellt.
ÖVE/ÖNORM EN 61400-4
2013 11 01
Windenergieanlagen - Teil 4: Auslegungsanforderungen für Getriebe von Windenergieanlagen (IEC 61400-...
Norm
Norm
ISO 76:2006
Ausgabedatum : 2006 05 05
Rolling bearings — Static load ratings
Norm
ISO 1328-1:2013
Ausgabedatum : 2013 08 20
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
Norm
ISO 4287:1997
Ausgabedatum : 1997 04 03
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
Norm
ISO 4288:1996
Ausgabedatum : 1996 08 08
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
Norm
ISO 4406:1999
Ausgabedatum : 1999 12 02
Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
Norm
ISO 5725-2:1994
Ausgabedatum : 1994 12 22
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
Technische Regel
ISO/TR 10064-3:1996
Ausgabedatum : 1996 08 08
Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
Norm
ISO 12925-1:1996
Ausgabedatum : 1996 12 05
Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems
Norm
ISO 14104:2014
Ausgabedatum : 2014 05 28
Gears — Surface temper etch inspection after grinding, chemical method (Corrected version 2014-07)
Norm
DIN 471
Ausgabedatum : 2011 04
Sicherungsringe (Halteringe) für Wellen - Regelausführung und schwere Ausführung
Norm
DIN 472
Ausgabedatum : 2011 10
Sicherungsringe (Halteringe) für Bohrungen - Regelausführung und schwere Ausführung
Norm
DIN 6892
Ausgabedatum : 2012 08
Mitnehmerverbindungen ohne Anzug - Passfedern - Berechnung und Gestaltung
Norm
DIN 51517-3
Ausgabedatum : 2014 02
Schmierstoffe - Schmieröle - Teil 3: Schmieröle CLP, Mindestanforderungen
Norm
ÖNORM EN ISO 4288
Ausgabedatum : 1998 03 01
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Regeln und Verfahren für die Beurteilung der Oberflächenbeschaffenheit (ISO 4288:1996)
Norm
ÖNORM EN 12680-3
Ausgabedatum : 2012 02 01
Gießereiwesen - Ultraschallprüfung - Teil 3: Gussstücke aus Gusseisen mit Kugelgraphit
Norm
ISO 76:2006
Ausgabedatum : 2006 05 05
Rolling bearings — Static load ratings
Norm
ISO 281:2007
Ausgabedatum : 2007 02 22
Rolling bearings — Dynamic load ratings and rating life
Norm
ISO 1328-1:2013
Ausgabedatum : 2013 08 20
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
Norm
ISO 4287:1997
Ausgabedatum : 1997 04 03
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
Norm
ISO 4288:1996
Ausgabedatum : 1996 08 08
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
Norm
ISO 4406:2021
Ausgabedatum : 2021 01 07
Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
Norm
ISO 5725-2:2019
Ausgabedatum : 2019 12 06
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
Norm
ISO 6336-1:2006
Ausgabedatum : 2006 09 04
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors (Corrected version 2007-03)
Norm
ISO 6336-2:2006
Ausgabedatum : 2006 09 04
Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) (Corrected version 2007-03)
Norm
ISO 6336-3:2006
Ausgabedatum : 2006 09 04
Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength (Corrected version 2007-03)
Norm
ISO 6336-5:2003
Ausgabedatum : 2003 06 27
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
Norm
ISO 6336-6:2006
Ausgabedatum : 2006 08 14
Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load
Technische Regel
ISO/TR 10064-3:1996
Ausgabedatum : 1996 08 08
Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
Technische Regel
ISO/TR 13593:1999
Ausgabedatum : 1999 10 21
Enclosed gear drives for industrial applications
Technische Regel
ISO/TR 13989-1:2000
Ausgabedatum : 2000 03 30
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears — Part 1: Flash temperature method
Technische Regel
ISO/TR 13989-2:2000
Ausgabedatum : 2000 03 23
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears — Part 2: Integral temperature method
Norm
ISO 12925-1:2018
Ausgabedatum : 2018 01 17
Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems
Norm
ISO 14104:2017
Ausgabedatum : 2017 04 04
Gears — Surface temper etch inspection after grinding, chemical method
Norm
ISO 14635-1:2000
Ausgabedatum : 2000 06 08
Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
Norm
ISO 15243:2004
Ausgabedatum : 2004 02 11
Rolling bearings — Damage and failures — Terms, characteristics and causes
Norm
DIN 471
Ausgabedatum : 2011 04
Sicherungsringe (Halteringe) für Wellen - Regelausführung und schwere Ausführung
Norm
DIN 472
Ausgabedatum : 2017 06
Sicherungsringe (Halteringe) für Bohrungen - Regelausführung und schwere Ausführung
Norm
DIN 6885-2
Ausgabedatum : 2021 06
Mitnehmerverbindungen ohne Anzug, Passfedern, Nuten - Hohe Form für Werkzeugmaschinen - Teil 2: Maße, Toleranzen, Masse
Norm
DIN 6892
Ausgabedatum : 2012 08
Mitnehmerverbindungen ohne Anzug - Passfedern - Berechnung und Gestaltung
Norm
DIN 51517-3
Ausgabedatum : 2018 09
Schmierstoffe - Schmieröle - Teil 3: Schmieröle CLP, Mindestanforderungen