Jetzt anpassen und kaufen
267,30 €
exkl. USt.
Konfigurieren
Norm

ÖVE/ÖNORM EN 60349-4

Ausgabedatum: 2013 10 01

Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter (IEC 60349-4:2012) (english version)

This part of IEC 60349 applies to converter-fed permanent magnet synchronous motors or generators (machines) forming part of the equipment of electrically propelled rail...
Weiterlesen
Gültig
This part of IEC 60349 applies to converter-fed permanent magnet synchronous motors or generators (machines) forming part of the equipment of electrically propelled rail and road vehicles. This standard is derived from IEC 60349-2 changing the subject to permanent magnet synchronous machines. The object of this part is to enable the performance of a machine to be confirmed by tests and to provide a basis for assessment of its suitability for a specified duty and for comparison with other machines. Where further testing is to be undertaken in accordance with a combined test, it may be preferable, that some type and investigation tests be carried out on the combined test bed, to avoid duplication. Particular attention is drawn to the need for collaboration between the designers of the machine and its associated converter as detailed in 5.1. The electrical input to motors covered by this part is be from an electronic converter. Generators may be connected to a rectifier or a converter. The machines covered by this part are classified as follows: a) Traction motors Motors for propelling rail or road vehicles. b) Main generators Generators for supplying power to traction motors on the same vehicle or train. c) Auxiliary motors not covered by IEC 60034 Motors for driving compressors, fans, auxiliary generators or other auxiliary machines. d) Auxiliary generators not covered by IEC 60034 Generators for supplying power for auxiliary services such as air conditioning, heating, lighting and battery charging, etc.
ÖVE/ÖNORM EN 60349-4
2013 10 01
Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magn...
Norm