Jetzt anpassen und kaufen
160,20 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 898-1

Ausgabedatum: 2013 04 15

Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 1: Schrauben mit festgelegten Festigkeitsklassen - Regelgewinde und Feingewinde (ISO 898-1:2013)

Dieser Teil von ISO 898 legt mechanische und physikalische Eigenschaften von Schrauben aus Kohlenstoffstahl und legiertem Stahl fest, die in einem Bereich der Umgebungste...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 63 Seiten
Sprache:
Deutsch | Englisch
Dieser Teil von ISO 898 legt mechanische und physikalische Eigenschaften von Schrauben aus Kohlenstoffstahl und legiertem Stahl fest, die in einem Bereich der Umgebungstemperatur von 10 °C bis 35 °C geprüft werden. Schrauben (im Englischen als "fasteners" bezeichnet, wenn gleichzeitig "bolts", "screws" und "studs" angesprochen werden), die den Anforderungen dieses Teils von ISO 898 entsprechen, werden in diesem Bereich der Umgebungstemperatur bewertet. Es kann sein, dass sie die festgelegten mechanischen und physikalischen Eigenschaften bei höheren Temperaturen (siehe Angaben in Anhang B) und/oder niedrigeren Temperaturen nicht beibehalten.
ÖNORM EN ISO 898-1
2013 04 15
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 1...
Norm
ÖNORM EN ISO 898-1
2009 10 01
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 1...
Norm
ÖNORM EN ISO 898-1/AC
2000 01 01
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 1...
Norm
ÖNORM EN ISO 898-1
1999 12 01
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 1...
Norm
ÖNORM EN 20898-1
1991 12 01
Mechanische Eigenschaften von Verbindungselementen - Schrauben
Norm
ÖNORM ISO 898-1
1989 10 01
Mechanische Eigenschaften von Verbindungselementen; Schrauben
Norm
ÖNORM ISO 898-1
1981 01 01
Mechanische Eigenschaften von Verbindungselementen; Schrauben
Norm
ÖNORM M 5001-3
1977 10 01
Schrauben, Muttern und ähnliche Gewinde-und Formteile;techn. Lieferbedingungen; Festigkeitsklassen u...
Vornorm
ÖNORM M 5001-7
1976 08 01
Schrauben, Muttern und ähnliche Gewinde- und Formteile; technische Lieferbedingungen; Kennzeichnung ...
Norm
ÖNORM M 5001
1958 02 03
Schrauben, Muttern, Scheiben und ähnliche Gewinde-und Formteile; technische Lieferbedingungen
Norm
ÖNORM M 5001
1923 01 31
Blanke Sechskantschrauben für 1 und 2 Muttern oder 1 Kronenmutter von 1,7 - 10 mm; metrisches Gewind...
Norm
Historie aufklappen
Norm
ISO 68-1:1998
Ausgabedatum : 1998 12 20
ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
Norm
ISO 148-1:2009
Ausgabedatum : 2009 11 05
Metallic materials — Charpy pendulum impact test — Part 1: Test method
Norm
ISO 225:2010
Ausgabedatum : 2010 09 24
Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
Norm
ISO 261:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — General plan
Norm
ISO 262:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
Norm
ISO 273:1979
Ausgabedatum : 1979 06 01
Fasteners — Clearance holes for bolts and screws (Corrected version 1992-07)
Norm
ISO 724:1993
Ausgabedatum : 1993 10 07
ISO general-purpose metric screw threads — Basic dimensions
Norm
ISO 898-2:2012
Ausgabedatum : 2012 03 16
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
Norm
ISO 898-5:2012
Ausgabedatum : 2012 05 30
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
Norm
ISO 898-7:1992
Ausgabedatum : 1992 11 12
Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
Norm
ISO 965-1:2013
Ausgabedatum : 2013 09 13
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
Norm
ISO 965-2:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
Norm
ISO 965-4:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
Norm
ISO 4042:1999
Ausgabedatum : 1999 07 01
Fasteners — Electroplated coatings
Norm
ISO 6157-1:1988
Ausgabedatum : 1988 07 28
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements (Corrected version 1992-07)
Norm
ISO 6157-3:1988
Ausgabedatum : 1988 07 21
Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements (Corrected version 1992-07)
Norm
ISO 6506-1:2014
Ausgabedatum : 2014 09 25
Metallic materials — Brinell hardness test — Part 1: Test method
Norm
ISO 6507-1:2005
Ausgabedatum : 2005 12 08
Metallic materials — Vickers hardness test — Part 1: Test method
Norm
ISO 6508-1:2005
Ausgabedatum : 2005 12 09
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
Schlussentwurf
ISO/FDIS 6508-1
Ausgabedatum : 2014 09 11
Metallic materials — Rockwell hardness test — Part 1: Test method
Norm
ISO 6892-1:2009
Ausgabedatum : 2009 08 14
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
Entwurf
ISO/DIS 6892-1
Ausgabedatum : 2014 04 24
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
Norm
ISO 7500-1:2004
Ausgabedatum : 2004 08 13
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
Norm
ISO 16426:2002
Ausgabedatum : 2002 11 18
Fasteners — Quality assurance system
Norm
ISO 68-1:1998
Ausgabedatum : 1998 12 20
ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
Norm
ISO 148-1:2016
Ausgabedatum : 2016 10 12
Metallic materials — Charpy pendulum impact test — Part 1: Test method
Norm
ISO 225:2010
Ausgabedatum : 2010 09 24
Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
Norm
ISO 261:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — General plan
Norm
ISO 262:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
Norm
ISO 273:1979
Ausgabedatum : 1979 06 01
Fasteners — Clearance holes for bolts and screws (Corrected version 1992-07)
Norm
ISO 724:1993
Ausgabedatum : 1993 10 07
ISO general-purpose metric screw threads — Basic dimensions
Norm
ISO 898-2:2012
Ausgabedatum : 2012 03 16
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
Norm
ISO 898-5:2012
Ausgabedatum : 2012 05 30
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
Norm
ISO 898-7:1992
Ausgabedatum : 1992 11 12
Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
Norm
ISO 965-1:2013
Ausgabedatum : 2013 09 13
ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
Norm
ISO 965-2:1998
Ausgabedatum : 1998 12 20
ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
Norm
ISO 965-4:2021
Ausgabedatum : 2021 07 06
ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
Norm
ISO 4042:2018
Ausgabedatum : 2018 08 13
Fasteners — Electroplated coating systems
Norm
ISO 6157-1:1988
Ausgabedatum : 1988 07 28
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements (Corrected version 1992-07)
Norm
ISO 6157-3:1988
Ausgabedatum : 1988 07 21
Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements (Corrected version 1992-07)
Norm
ISO 6506-1:2014
Ausgabedatum : 2014 09 25
Metallic materials — Brinell hardness test — Part 1: Test method
Norm
ISO 6507-1:2018
Ausgabedatum : 2018 01 10
Metallic materials — Vickers hardness test — Part 1: Test method
Norm
ISO 6508-1:2016
Ausgabedatum : 2016 08 08
Metallic materials — Rockwell hardness test — Part 1: Test method
Norm
ISO 6892-1:2019
Ausgabedatum : 2019 11 15
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
Norm
ISO 7500-1:2018
Ausgabedatum : 2018 02 07
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
Norm
ISO 10683:2018
Ausgabedatum : 2018 08 13
Fasteners — Non-electrolytically applied zinc flake coating systems
Norm
ISO 10684:2004
Ausgabedatum : 2004 07 12
Fasteners — Hot dip galvanized coatings
Norm
ISO 16426:2002
Ausgabedatum : 2002 11 18
Fasteners — Quality assurance system
Norm
ISO 898-1:2013
Ausgabedatum : 2013 01 14
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread