Jetzt anpassen und kaufen
79,20 €
exkl. USt.
Konfigurieren
Norm

ÖVE/ÖNORM EN 61701

Ausgabedatum: 2012 11 01

Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:2011) (english version)

Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure during their lifetime. Highly corrosive wet atmospheres, such as marine environ...
Weiterlesen
ZURÜCKGEZOGEN : 2023 07 02
Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure during their lifetime. Highly corrosive wet atmospheres, such as marine environments, could eventually degrade some of the PV module components (corrosion of metallic parts, deterioration of the properties of some non-metallic materials - such as protective coatings and plastics - by assimilation of salts, etc.) causing permanent damages that could impair their functioning. Temporary corrosive atmospheres are also present in places where salt is used in winter periods to melt ice formations on streets and roads. This Standard describes test sequences useful to determine the resistance of different PV modules to corrosion from salt mist containing Cl- (NaCl, MgCl2, etc.). All tests included in the sequences, except the bypass diode functionality test, are fully described in IEC 61215, IEC 61646, IEC 62108, IEC 61730-2 and IEC 60068-2-52. They are combined in this Standard to provide means to evaluate possible faults caused in PV modules when operating under wet atmospheres having high concentration of dissolved salt (NaCl). Depending on the specific nature of the surrounding atmosphere to which the module is exposed in real operation several testing severities can be applied, as defined in IEC 60068-2-52. For example severity (1) is intended to be used for PV modules used in a marine environment, or in close proximity to the sea. Severities (3) to (6) are intended for PV modules operating in locations where there could be a change between salt-laden and dry atmospheres, for examples in places where salt is used to melt ice formations. Severity (2) is not suitable for PV modules as testing conditions are too weak (this severity is originally intended for products exposed to corrosive environments from time to time that are normally protected by an enclosure) and should be avoided when applying this Standard. This Standard can be applied to both flat plate PV modules and concentrator PV modules and assemblies.
ÖVE/ÖNORM EN 61701
2012 11 01
Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:2011) (english version)
Norm
ÖVE/ÖNORM EN 61701
2000 10 01
Salznebel-Korrosionsprüfung von photovolatischen (PV)-Modulen (IEC 61701:1995)
Norm
Norm
ISO/IEC 17025:2005
Ausgabedatum : 2005 05 12
General requirements for the competence of testing and calibration laboratories (Corrected version 2005-05)
Norm
ISO/IEC 17025:2017
Ausgabedatum : 2017 11 29
General requirements for the competence of testing and calibration laboratories (Corrected version 2017-11)
Norm
OVE EN IEC 61701
Ausgabedatum : 2024 02 01
Photovoltaik (PV-)Module - Salznebel-Korrosionsprüfung (( IEC 61701:2020) EN IEC 61701:2020) (deutsche Fassung)
Norm
OVE EN IEC 61701
Ausgabedatum : 2024 02 01
Photovoltaic (PV) modules - Salt mist corrosion testing (( IEC 61701:2020) EN IEC 61701:2020) (english version)