Jetzt anpassen und kaufen
98,22 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN 22768-2

Ausgabedatum: 1993 08 01

Allgemeintoleranzen - Teil 2: Toleranzen für Form und Lage ohne einzelne Toleranzeintragung (ISO 2768-2:1989)

Für Abmessungen ohne Toleranzangabe sind die Allgemeintoleranzen für Form- und Lagetoleranzen im Nennmaßbereich bis 3000 mm in drei Toleranzklassen festgelegt. Für Nennma...
Weiterlesen
ZURÜCKGEZOGEN : 2021 08 16
Herausgeber:
Austrian Standards International
Format:
Digital | 15 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Für Abmessungen ohne Toleranzangabe sind die Allgemeintoleranzen für Form- und Lagetoleranzen im Nennmaßbereich bis 3000 mm in drei Toleranzklassen festgelegt. Für Nennmaße über 3000 mm bis 8000 mm ist ÖNORM M 1365 Teil 1 anzuwenden. Im nationalen Vorwort sind die Änderungen gegenüber der bisherigen ÖNORM M 1364, November 1984 angeführt. Der Anwendungsbereich umfaßt metallische und nichtmetallische Formelemente, die durch Spanen oder Umformen gefertigt wurden. Mit den Toleranzen sollen Formelemente in Zeichnungen erfaßt werden, die nicht mit einzeln eingetragenen Toleranzen in Form und Lage versehen sind. Die Toleranzwerte der Genauigkeitsklassen sind für die entsprechenden Nennmaßbereiche festgelegt. Im Anhang ist ein Konzept zur Anwendung angeführt.
ÖNORM EN ISO 22081
2021 08 15
Geometrische Produktspezifikation (GPS) - Geometrische Tolerierung - Allgemeine geometrische und Maß...
Norm
ÖNORM EN 22768-2
1993 08 01
Allgemeintoleranzen - Teil 2: Toleranzen für Form und Lage ohne einzelne Toleranzeintragung (ISO 276...
Norm
ÖNORM ISO 2768-2
1990 10 01
Allgemeintoleranzen; Form- und Lagetoleranzen für Formelemente ohne Toleranzangabe
Norm
ÖNORM M 1364
1984 11 01
Allgemeintoleranzen; Form und Lage
Norm
Historie aufklappen
Norm
ISO 1101:2004
Ausgabedatum : 2004 12 09
Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Norm
ISO 2768-1:1989
Ausgabedatum : 1989 11 02
General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
Norm
ISO 5459:1981
Ausgabedatum : 1981 11 01
Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances
Norm
ISO 8015:1985
Ausgabedatum : 1985 12 18
Technical drawings — Fundamental tolerancing principle
Norm
ISO 1101:2017
Ausgabedatum : 2017 02 01
Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
Norm
ISO 2768-1:1989
Ausgabedatum : 1989 11 02
General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
Norm
ISO 5459:2011
Ausgabedatum : 2011 08 10
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
Norm
ISO 8015:2011
Ausgabedatum : 2011 05 23
Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
Norm
ÖNORM EN ISO 22081
Ausgabedatum : 2021 08 15
Geometrische Produktspezifikation (GPS) - Geometrische Tolerierung - Allgemeine geometrische und Maßspezifikationen (ISO 22081:2021)
Norm
ISO 2768-2:1989
Ausgabedatum : 1989 11 02
General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications