Jetzt anpassen und kaufen
203,49 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN 1993-1-6

Ausgabedatum: 2007 10 01

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-6: Festigkeit und Stabilität von Schalen

ÖNORM EN 1993-1-6 gives design requirements of stiffened and unstiffened plates which are subject to in-plane forces. This Standard defines the characteristic values of t...
Weiterlesen
ZURÜCKGEZOGEN : 2012 06 16
Herausgeber:
Austrian Standards International
Format:
Digital | 109 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
ÖNORM EN 1993-1-6 gives design requirements of stiffened and unstiffened plates which are subject to in-plane forces. This Standard defines the characteristic values of the resistance of the structure. For the partial factors for resistance to be used in the verification expressions, see ÖNORM EN 1993-1-1. This Standard is concerned with the requirements for design against the ultimate limit states of: plastic limit; cyclic plasticity; buckling; fatigue. The provisions in this Standard apply to axisymmetric shells and associated circular or annular plates and beam section rings and stringer stiffeners where they form part of the complete structure. The following shell forms are covered: cylinders, cones and spherical caps. This ÖNORM is intended for application to structural engineering steel shell structures. However, its provisions can be applied to other metallic shells provided that the appropriate material properties are duly taken into account. The provisions of this Standard are intended to be applied within the temperature range defined in the relevant ÖNORM EN 1993 application parts. The maximum temperature is restricted so that the influence of creep can be neglected if high temperature creep effects are not covered by the relevant application part. The provision of this Standard apply to structural design under actions that can be treated as quasi-static in nature. This Standard does not cover the aspects of leakage of contents.
ÖNORM EN 1993-1-6
2017 11 01
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-6: Festigkeit und Stabilität von Sc...
Norm
ÖNORM EN 1993-1-6
2012 06 15
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-6: Festigkeit und Stabilität von Sc...
Norm
ÖNORM EN 1993-1-6
2007 10 01
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-6: Festigkeit und Stabilität von Sch...
Norm
ÖNORM B 4650-7
1980 12 01
Stahlbau; Beulung von Kugelschalen
Norm
ÖNORM B 4650-5
1980 08 01
Stahlbau; Beulung von Kreiszylinderschalen mit abgestufter Wanddicke
Norm
ÖNORM B 4650-4
1977 11 01
Stahlbau; Beulung von Kreiszylinderschalen
Norm
Historie aufklappen
Norm
ÖNORM EN 1990
Ausgabedatum : 2003 03 01
Eurocode - Grundlagen der Tragwerksplanung
Norm
ÖNORM EN 1993-1-10
Ausgabedatum : 2010 08 15
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-10: Stahlsortenauswahl im Hinblick auf Bruchzähigkeit und Eigenschaften in Dickenrichtung (konsolidierte Fassung)
Norm
ÖNORM EN 1993-1-9
Ausgabedatum : 2005 11 01
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-9: Ermüdung
Norm
ÖNORM EN 1993-1-3
Ausgabedatum : 2010 09 01
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-3: Allgemeine Regeln - Ergänzende Regeln für kaltgeformte dünnwandige Bauteile und Bleche (konsolidierte Fassung)
Norm
ÖNORM EN 1993-2
Ausgabedatum : 2010 08 15
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 2: Stahlbrücken (konsolidierte Fassung)
Norm
ÖNORM EN 1993-3-2
Ausgabedatum : 2007 04 01
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 3-2: Türme, Maste und Schornsteine - Schornsteine
Norm
ÖNORM EN 1993-3-1
Ausgabedatum : 2010 08 15
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 3-1: Türme, Maste und Schornsteine - Türme und Maste (konsolidierte Fassung)
Norm
ÖNORM EN 1993-1-5
Ausgabedatum : 2012 06 15
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-5: Plattenförmige Bauteile (konsolidierte Fassung)
Norm
ÖNORM EN 1993-1-4
Ausgabedatum : 2007 04 01
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 1-4: Allgemeine Bemessungsregeln - Ergänzende Regeln zur Anwendung von nichtrostenden Stählen
Norm
ÖNORM EN 1993-1-12
Ausgabedatum : 2010 10 01
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-12: Zusätzliche Regeln zur Erweiterung von EN 1993 auf Stahlsorten bis S 700 (konsolidierte Fassung)
Norm
ÖNORM EN 1993-4-2
Ausgabedatum : 2010 06 01
Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-2: Tankbauwerke (konsolidierte Fassung)
Norm
ÖNORM EN 1993-5
Ausgabedatum : 2012 03 01
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 5: Pfähle und Spundwände (konsolidierte Fassung)
Norm
ÖNORM EN 1993-4-3
Ausgabedatum : 2010 06 01
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen (konsolidierte Fassung)
Norm
ÖNORM EN 1993-4-1
Ausgabedatum : 2010 06 01
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-1: Silos (konsolidierte Fassung)
Norm
ÖNORM EN 1090-2
Ausgabedatum : 2012 01 01
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln für die Ausführung von Stahltragwerken
Norm
ÖNORM EN 1993-1-6
Ausgabedatum : 2012 06 15
Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 1-6: Festigkeit und Stabilität von Schalen (konsolidierte Fassung)