Jetzt anpassen und kaufen
109,76 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 9013

Ausgabedatum: 2004 04 01

Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qualität (ISO 9013:2002 + EN ISO 9013:2002/A1:2003)

Behandelt sind autogene Brennschnitte von 3 mm bis 300 mm, Plasmaschnitte von 1 mm bis 150 mm und Laserstrahlschnitte von 0,5 mm bis 40 mm an Werkstoffen, die zum autogen...
Weiterlesen
ZURÜCKGEZOGEN : 2017 05 16
Herausgeber:
Austrian Standards International
Format:
Digital | 30 Seiten
Sprache:
Deutsch | Englisch | Download DE/EN
Standards mitgestalten:
Behandelt sind autogene Brennschnitte von 3 mm bis 300 mm, Plasmaschnitte von 1 mm bis 150 mm und Laserstrahlschnitte von 0,5 mm bis 40 mm an Werkstoffen, die zum autogenen Brennschneiden, zum Plasmaschneiden und zum Laserstrahlschneiden geeignet sind. Festgelegt sind geometrische Produktspezifikationen sowie Maß-(Qualitäts-)toleranzen. Diese sind anwendbar, wenn Bezug auf diese Norm in den Zeichnungen oder in betreffenden Dokumenten, zB Lieferbedingungen, genommen wird. Sollen diese Festlegungen auch für Teile angewendet werden, die durch unterschiedliche Schneidprozesse hergestellt werden, so ist dies besonders zu vereinbaren (zB Hochdruck-Wasserstrahlschneiden).
ÖNORM EN ISO 9013
2017 05 15
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qual...
Norm
ÖNORM EN ISO 9013
2004 04 01
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qual...
Norm
ÖNORM EN ISO 9013
2003 08 01
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qual...
Norm
ÖNORM EN ISO 9013
1995 05 01
Schweißen und verwandte Verfahren - Güteeinteilung und Maßtoleranzen für autogene Brennschnittfläche...
Norm
ÖNORM M 7858
1991 10 01
Thermisches Schneiden - Laserstrahlschneiden von metallischen Werkstoffen - Verfahrensgrundlagen, Gü...
Norm
ÖNORM M 7856
1990 02 01
Thermisches Schneiden; autogenes Brennschneiden; Verfahrensgrundlagen, Begriffsbestimmungen, Güte, M...
Norm
ÖNORM M 7857
1990 02 01
Thermisches Schneiden; Plasmaschneiden; Verfahrensgrundlagen, Begriffsbestimmungen, Güte, Maßtoleran...
Norm
Historie aufklappen
Norm
ISO 2553:1992
Ausgabedatum : 1992 10 15
Welded, brazed and soldered joints — Symbolic representation on drawings
Norm
ISO 3274:1996
Ausgabedatum : 1996 12 05
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
Norm
ISO 8015:1985
Ausgabedatum : 1985 12 18
Technical drawings — Fundamental tolerancing principle
Norm
ISO 1101:1983
Ausgabedatum : 1983 12 01
Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Generalities, definitions, symbols, indications on drawings
Norm
ISO 1302:2002
Ausgabedatum : 2002 02 14
Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
Norm
ISO 2553:2019
Ausgabedatum : 2019 03 18
Welding and allied processes — Symbolic representation on drawings — Welded joints (Corrected version 2021-09)
Norm
ISO 3274:1996
Ausgabedatum : 1996 12 05
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
Norm
ISO 4287:1997
Ausgabedatum : 1997 04 03
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
Norm
ISO 4288:1996
Ausgabedatum : 1996 08 08
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture
Norm
ISO 8015:2011
Ausgabedatum : 2011 05 23
Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
Norm
ÖNORM EN ISO 9013
Ausgabedatum : 2017 05 15
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qualität (ISO 9013:2017)
Norm
ISO 9013:2002
Ausgabedatum : 2002 10 03
Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances (Corrected version 2002-10)